ResumeID: 1761777 7338 Bass lake RD
New Hope, MN 55428
(612) 702-8396

Any full time or part time entry position.

Molding And Trimming
Start Date: 9/2015 End Date: 12/2015
running injection molding press, Mostly plastic component, medical tubing and catheter, single and
tubing, wire-reinforced, depending on size. Also packaged assemblies.

Machine OPerator
Larson System
Ham Lake,MN
Start Date: 7/06/14 End Date: 8/31/15

Worked in the machining area running CNC machines, reading prints and handling variety in my role.
Made engineered testing products including custom products as well as automated solutions. Responsible
for your own tool setting and inspection, machine maintenance,

Machine operator
Division Stamping
Start Date: 10/12 End Date: 072014

Worked in the machining area and proved reliability, worked on complex components and assemblies.
Operated a variety of metal stamping machines.

Material Handler/Driving forklift
Advance Response
Start Date: 12/23/10 End Date: 06/22/12
Loads, unloads, and moves materials within or near plant, yard, or work site, performing any combination
of following duties: Reads work order or follows oral instructions to ascertain materials or containers to be

Opens containers, using steel cutters, crowbar,, or other. Loads and unloads materials onto or from
pallets, trays, racks, and shelves by hand. Loads materials into vehicles and installs strapping, bracing, or
padding to prevent shifting or damage in transit, using. Conveys materials to or from storage or work sites
to designated area, using, electric dolly, wheelbarrow, or other device. Secures lifting attachments to
materials and conveys load, order picker

Coverall Cleaning Service
Start Date: 02/28/10 End Date: 10/25/10

Buildings,Hospitals,Clinics,Manufacturing,Education/Child Care, Auto Dealerships,Transportation, Retail
Stores,Restaurants,Fitness and Recreation Warehouses.
Blind Cleaning,Window Cleaning, Restroom Sanitation,Ceiling and Wall Cleaning Light
Maintenance,Power or Pressure Washing,Parking Lot Maintenance,Fire and Flood Clean,Carpet
Cleaning,Hot Water Extraction (Steam Cleaning Low Moisture Cleaning (Bonnet Cleaning & “Dry”
Cleaning Carpets)Hard Floor Care, Machine Scrubbing,Scrub &,Stripping &

Machine Operator
New Hope,MN
Start Date: 12/16/08 End Date: 11/09/09
printing and operating hands and foot prepress for in-house control panel assemblie.Aslo print graphics
on a thin sheet of die cut material,then we insert the graphic into an injection molding tool and over-mold it
with resin

Nonin Medical
Start Date: 12/12/07 End Date: 06/21/08
built medical devices,fingertip pulse oximeter to monitor oxygen and heart rate, I did
inspection,soldering,sorting,calibration,packaging,also used electronic equipment
to build medical devices,I also did plastic molding.

Progress Casting
Start Date: 07/29/07 End Date: 12/22/07
Manufacturing prats for Harley-Davidson bikes, Engine cylinder, nailer housing , aircraft engine, Diesel
engine oil sump , mold and sand aluminum casting Heat treatment welding assembly steel,Ability to lift
50 pounds, repetitively.

Operator Specialist
American Medical Systems
Start Date: 11/07/05 End Date: 11/07/07
Electrical/medical used tape measures and other tools such as screw driver, chisel, square, computer,
clamps, hand nuts to install circuit boards to into hardware or medical devices. We built medical solution
for male and female pelvic and prostrate work in the clean room environment.Work with a microscope to
built medical devices did inspection,soldering,sorting,calibration,packaging,also used electronic
equipment to build medical devices,I also did plastic molding able to use caliper micrometers,Cmm,
optical comparators.

Electronic Assembly
Entronix International, Inc.
Start Date: 01/05/04 End Date: 08/08/05
Re manufacturing cell phones and putting them through different stages to rebuild the phone like new,
data entry, testing phones for their signal strength and how well they still work.

Start Date: 8/1/2002 End Date: 4/1/2003
Installed motors into air conditions,heaters and wired electronic devices.I also used electronic equipment
to fix electronic parts.


Major: All Subjects
Park Center Senior High, MN US
Date Completed: 6/1/2003

Major: General
North Hennepin, MN US

Took computer classes in high school and at medtronics, hands on-training, machine operator, assembly
work,packaging and follow instruction well. Dependable, trustworthy, self-motivate, ambitious,
adaptable,openminded,and optimitic.

  • Updated 8 years ago

To contact this candidate email

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.