Bradley Cornell
Senior Electrical Engineer
Stillwater, MN
cornelbp@comcast.net – 651.439.0467
Position where skills, experience and knowledge of embedded microprocessors can be applied.
WORK EXPERIENCE
Software /Electrical Engineer
Countryside Design – Stillwater, MN – 2003 to Present
Responsibilities
Latest programs:
Aerospace project, Brushless DC motor controller at ½HP.
Web based Trash compactor monitor system with Cellar modem and ethernet
Quick turn electrical designs, utilizing high-density SMT PCB layout designs utilizing the latest electronic
components available. Clients range from industrial to military.
Developed low power micro-controller design to cut power consumption my 50%.
Project planning and project costing. Developed detailed project plans and executed to deliver designs on time.
Design an active communications cable for a Singar(ITT) radios to extend the handheld display module. This
program required successful completion of EMI/EMC, Environmental qualifications testing to MIL-STDS.
Ported software for a joystick used in off road construction heavy equipment product. This software was in
German and part of the project was to convert it to English and porting the code from 8051 micro-controller
design to Atmel controllers.
Accomplishments
Contract engineering delivering solutions on time and on budget to meet clients requirements and
expectations.
Skills Used
Electrical Design utilizing CAD tools and analog circuit simulation to design hardware.
C compilers to write test code and final product firmware for programs. Several different processors families
have been supported from 8051 , TI DSPs of the msp430 and C2000 to Microchip PIC32.
Senior Electrical Engineer
Goodrich Sensor Systems Inc – Burnsville, MN – 2004 to 2013
Product support and re-design products for Ice Detector products
o Lead engineer for replacement of obsolete components with ROHS components.
o Manufacturing and customer repair support.
o Developed a new ground based ice detector, both the software and the hardware.
• Lead Electrical Engineer LAGL(Laser Above Ground Level)
o Developed all electrical circuits from the TI-DSP, laser detection and power supplies to meet both MIL-STDs
and RTCA commercial standards
o Provided detailed project planning to meet schedule
• Lead Electrical Engineer for LPAS(Laser Perimeter Awareness System)
o Final design and production with extensive system level debug and updates.
o Developed the cabling requirements for Military applications
o Designed a Flex Circuit design to meet continuous operation 24/7.
• Lead Electrical Engineer New product development for Homeland Security:
o System level and module level electrical design next generation LPAS.
o Multi system module with multi processors per module, temperature controls, multi communications ports
from serial […] to Ethernet […]
o New TI-DSP design with Ethernet, video on board as well as an FPGA for laser timing measurement.
• Member of the Electrical Engineering Steering Committee (support for development tools, training and user
support).
• Latest program, Aerospace project, Brushless DC motor controller at ½HP.
• Quick turn electrical designs, utilizing high-density SMT PCB layout designs utilizing the latest electronic
components available. Clients range from industrial to military.
• Developed low power micro-controller design to cut power consumption my 50%.
• Project planning and project costing. Developed detailed project plans and executed to deliver designs on
time.
• Design an active communications cable for a Singar(ITT) radios to extend the handheld display module. This
program required successful completion of EMI/EMC, Environmental qualifications testing to MIL-STDS.
• Ported software for a joystick used in off road construction heavy equipment product. This software was in
German and part of the project was to convert it to English and porting the code from 8051 micro-controller
design to Atmel controllers.
Senior Electrical Engineer
Thermo King Inc – Bloomington, MN – 1999 to 2001
The most resent project was on time, under budget and the product was within projected manufacturing costs.
• The project was a HMI with a graphics LCD display using new technology to support a low voltage low power
design using a 32bit ARM micro-controller with multiple communications including CAN, RS-485 and RS-232.
• All programs were required to pass CE EMI/EMC qualifications testing.
• Multi vendor’s relationships established to assist on the design team to complete projects.
Senior Software/Hardware Contract Engineer Embedded
systems Inc – 1995 to 1999
Customer Thermo King).
• Redesigned a modem for industrial controls adding CAN (SAE-J1939) communications hardware along with
multi drop communications software.
• Project management, Thermo King support.
• Software and hardware development for 8051 and 80C196 based designs.
• Designed Printed Circuit Boards (Imation LS120 product manufacturing machines).
• Provided the hardware platform and software drivers for CAN (SAE-J1939) to be integrated into a salt-sander
highway truck controller.
Electrical Engineer
Dimensions Unlimited Inc – Saint Paul, MN – 1991 to 1995
Developed a new product offering based on customer requiring sine wave power. This inverter product was
developed using the latest technology for software and hardware development.
EDUCATION
studied for bachelor’s in Mathematics, Computer Science
Metro State University, University of Minnesota and Century College
1993 to 1999
Associates in Electronics Technology
Electronics Institute
1982
ADDITIONAL INFORMATION
• Awarded a 2 Patents, First a co-inverter (DC to AC inverter), Second Heater control architecture for an ice
protection system.
• Process Control, Motor Control, HMI Interfaces, Serial Communications, Network Communications, Power
high power AC/DC(KW)and low power(mW) solutions.
• Software Languages: ASSEMBLY, C/C++, PL/M, PASCAL.
• Processors: Intel (80C51, X86, […] Atmel(ARM AT91x, AVR),
Motorola […] specific […]
TI […] […]
• Project planning, management and project costing.
• Support team building with a commitment to on-time project completion.
• Vendor negotiations both domestic and international.
• Multiple product approvals with agency’s, CE, UL.
• Environmental and emissions testing and design to […] and 461.
• Aerospace design and qualified to meet RTCA DO-160.
• CAD software:
Mechanical Drawings and packaging concepts:
Component details, assembly details AutoCad2002.
Electrical Drawings: Schematics and PCB layout PCAD2001 and Cadence tools
• Software: MS-Project2000, MS-office2000, Lotus Notes, Adobe, etc.
To contact this candidate email cornelbp@comcast.net