David Schofield

David Schofield

Extensive experience with Bio pharm, material inspection, bore scope inspection, vendor audit, pipe welding and inspection.
Have acted as Quality control manager in charge of document control & turnover packages.
Assignments range from high purity piping, to nuclear power plant inspection. Completed projects overseas, offshore and across the United States.
Am an American Welding Society Certified Welding Inspector (CWI) as well as Board Certified Construction Health Safety Technician (CHST).

(512) 786-8224
Austin, TX 78727

Welding Inspector Abeninsa Epc Henkly Calififorna
June 2014 to December 2015
Worked night shift performing fit up and welding inspection on Majave Solor project.

Welding Inspector Troy Pipe Victoria, TX
February 2014 to June 2014
Duty included weld inspection of 12″ / 12.5 ” pipeline.
Also worked with coating crew and witness coating process from sandblasting, preheat to (NACE) Holiday testing.

Safety manager Beard Mechanical / Samsung Austin, TX
August 2012 to 2014
Duty’s included witnessing pipe / vessel demo, scaffold inspection, hot work permits and confined space.
Project manager,
Zack Prince

Project Manager, Mr. Leland Short De Dietrich Process Systems Corpus Christi, TX
2012 to January 2012
Corpus Christi, TX
Inspecting ASME glass lined vessels at De Dietrich fabrication shop.
Witnessed Holiday testing and Hydro test.
Project Manager, Mr. Leland Short
(281) 872-3600

June 2011 Ryan, Fresno, California
Completed inspection of Sharp Solar panels.
Over torque and scratches where item encounter.

Orbital welding inspector Total Facility Solutions Raleigh, NC
March 2011 to 2012
Performed CWI weld inspection in fabrication shop.
Performed bore scope weld inspection at a Pfizer project in Maxton, NC and also spent time at Suny Nano Tech fab in Albany, NY

Orbital welding inspector Total Facility Solutions Hemlock, MI
August 2010 to March 2011
Performed HE leak check on Siline system, Vessels and piping.

Welding Inspector Chevron Salt Lake City, UT
September 2008 to 2009
Salt Lake City
Inspection performed on carbon steel pipe and ASME pressure vessels.

Bore scoping of orbital welds Hospira
July 2008 to August 2008
Shut down:
Bore scope examination & document control
Replaced one tank & transfer panel.

Bore scoping of orbital welds LBXS Singapore Singapore
October 2007 to February 2008
Lonza pharmaceutical, LBXS Singapore
Bore scope examination & document control
Performed Orbital welding on non-documented drain system.

Welding Inspector Samsung Austin, TX
November 2006 to June 2007
Responsible for ( GTAW ) pipe inspection of process cooling water.
Sizes range from Schedule 10 – 10″ thru 30″

Performed pressure test Maxim San Antonio, TX
September 2006 to October 2006
Performed pressure test, Analytical testing & tool hookup.

Shop inspector Stryker Pharmaceutical Lebanon, NH
September 2005 to July 2006
Performed material inspection, bore scope examination, document control & turnover packages.

Quality control manager IBM Fishkill, NY
April 2004 to August 2005
Performed weld inspection, systems walk down & pressure test.

Quality control manager Infineon Technologies Richmond, VA
September 2003 to March 2004
Performed vender audit, weld inspection, systems walk down & pressure test.

Orbital welding inspector Amgen Pharmaceutical
November 2001 to August 2003
Covington, RI
Performed material inspection, visual orbital weld inspection, bore scope examination,
Document control & turnover packages.

Certified Welding Inspector (CWI) Intel Colorado Springs, CO
August 2000 to October 2001
Performed high purity orbital welding inspection and pressure testing at Intel, Fab 23. Colorado Springs, CO
IBM – 300 mm project. Responsible for chill water piping, pressure testing and welder certification. Fishkill, NY

CWI/ Nondestructive Inspection Specialist Reinhart & Associates Austin, TX
February 1997 to July 2000
Performed turbine inspections in Nuclear power plants. Structural steel inspections x-ray and pipe.
Recertified on 6″ carbon steel pipe under (ASME) boiler code to qualify R & A for an ASME repair stamp.

GTAW / Tig qelding Capella Aircraft Austin, TX
January 1995 to January 1996
Fabrication of parts and GTAW welding on aircraft fuselage.

Pipe Welder Martech International Morgan City, LA
1983 to 1992
Performed inspection and pipe welding, mostly hot taps.

Pipe Welder Ocean Systems Houston, TX
1982 to 1983
Performed Hyperbaric welding in the Gulf of Mexico, Persian Gulf and Nigeria.
Inspection of Shell Oil platforms in the Gulf of Mexico.

Hyperbaric welder Hydrotech Houston, TX
1979 to 1982
Certified on 6″ carbon steel pipe ASME- (GTAW) and (SMAW).
Completed pipe line repair in Gulf of Mexico, Red Sea

Structural steel welder / fitter Alamo Steel Austin, TX
1974 to 1979

Austin Community College
Austin, TX
1992 to 1995

  • Updated 7 years ago

To contact this candidate email d_Schofieldcwi@yahoo.com

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.