Eugene Lizer


Automation Engineer

Cross Hill, SC

Eugene F. Lizer Jr.
109 McCrary Road
Cross Hill, S.C. 29332


Process Automation Controls Programmer/Designer with over 25 years experience executing projects utilizing the following platforms:
Siemens S7 414 & 417 W/Profibus I/O & Siemens WinCC; Allen-Bradley PLC 2, 5, SLC, & Control Logix; Modicon 584, 984, & Quantum; TI 5/05 & 5/50; Emerson DeltaV W/Fieldbus I/O; Moore APACS & Quadlog; GE PLC Machine Edition; Allen-Bradley 1394 GML Motion Controller; PanelView; PanelMate; Intellution Fix 32; Controlview; Wonderware; AutoCAD; Microsoft Projects.


Automation Engineer
ConocoPhillips, Kuparuk, Alaska.
5/2010 – Current
On site contract position through Lizer Consulting LLC to provide PLC programming support for ongoing Oil & Gas capital projects. Also provided PLC programming support for equipment and instrumentation troubleshooting.
Maintained and revised PLC programs for the following platforms:
Moore APACS & Quadlog; TI 5/05 & 5/50; GE QuickPanel; Siemens S7 & WinCC; AB Control Logix; Emerson DeltaV.
Configured and supported Wonderware HMIs.
Generated reports from IP21 SCADA System utilizing SQL.

Controls Systems Integration Designer
AE Solutions, Greenville, SC.
6/2006 – 5/2010
Provided design services on a Siemens S7 Safety PLC for Fire and Gas System.

Automation Control Systems Designer
O’Neal Engineering, Greenville, S.C.
2001 – 6/2006
Provided design, programming, and configuration services on the following platforms:
AB PLC-5, Siemens 315-2 DP PLC, PanelView HMI, Siemens PC FI-45 Touchscreen.
Authored and executed Computer System Validation Installation and Operational Qualification protocols for Life Science GMP Projects.

Automation Controls Engineer
Michelin Tire Corporation, Greenville, S.C.
1997 – 2001
Generated Project Scopes of Work, Controls Narratives, program Grafcets, and wrote the PLC programs for tire building machines and a process oils bulk unloading and distribution project.
Generated and maintained engineering and construction schedules utilizing Microsoft Projects.
Projects utilized the following control platforms:
AB PLC5, Panelview 900 HMI, AB 1394 GML motion controllers.

Automation Controls Designer
Kvaerner John Brown Engineering, Greenville, S.C.
1993 – 1997
Created controls schematics and wiring diagrams on AutoCad.
Programmed PLCs and HMIs on various projects utilizing the following platforms:
Modicon Quantum 424-02, Omron 1000H, AB PLC 5, AB SLC-500, & Moore Products APACS DCS.

Automation Controls Designer
RMT Engineering, Greenville, S.C.
1988 – 1993
Created controls schematics and wiring diagrams on AutoCad.
Programmed PLCs on various projects utilizing the following platforms:
Modicon 984B & AB PLC 2.

Process Automation Controls Designer
Cryovac Div., W.R. Grace & Co., Duncan, S.C..
1984 – 1988
Created controls schematics and wiring diagrams on AutoCad.
Programmed AB PLC 2 and PLC 5 processors for barrier bag and films Electron Beam Accelerator Irradiation units.
Configured HMI graphics using Intellution Fix.


• Associate Degree, Electronic Engineering Technology, Spartanburg Technical College, 1985
• Associate Degree, Automotive Technology, Spartanburg Technical College, 1980
• Allen-Bradley PLC-2 Programming Parts 1 and 2, 1987
• Allen-Bradley PLC-5 Programming Parts 1 and 2, 1992
• Allen-Bradley 1394 Motion Control GML Programming, 1999
• 21 CFR Part 11 Training – EduQuest, 2002
• Auditing Computerized Systems Training – EduQuest, 2002
• cGMP Training, 2002
• Intellution IFIX Training, 2002
• CIS 110, Computer Program Design – Strayer University – 2003
• CIS 267, Visual Basic Programming – Strayer University – 2003
• CIS 265, Object Oriented Programming I – Strayer University – 2003
• CIS 175, Introduction to Networking – Strayer University – 2004
• Emerson Delta V Training Seminar – 2006

  • Updated 7 years ago

To contact this candidate email

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.