Eugene Pillar

This resume has been forwarded to you at the request of Monster User xnerx03 pulled, likely oq, but emailed.

Eugene Pillar
Last updated: 01/16/16

Job Title: no specified
Company: no specified
Rating: no specified
Screening score: no specified
Status: no specified

East Brunswick, NJ 08816

Quick View Links:

Resume Section
Summary Section


Resume Headline: Eugene Pillar – Sr Staff RF Design Engineer Resume Value: u9udi986crkixz6s

Eugene H. Pillar
14 Ellison Ave, East Brunswick NJ 08816 (Cell) 908-421-3897

Background: Highly experienced RF Microwave Design Engineer with proven record of success.

-Experienced in RF Design from Conceptual, Synthesis, Analysis, fabrication, assembly, to Integration and hands on Test.
-Experienced in Thin and Thick film design and implementation, multilayer, hard and soft substrates, analog and RF layouts.
-Experienced in all aspects of Design, establishing and flow down of specs and requirements.
-Experienced running design teams, overseeing and managing documentation of designers, draftsmen, production and test personnel
-Experienced Designing and Packaging Hermetic chip and wire Modules, Slices, and Entire Units down to the circuit level.
-Experienced Designing, analyzing and Testing circuits and systems from DC to 30 GHz.
-Experienced in AWR Microwave Office, ADS, ORCAD Capture /Spice.
-Comfortable designing behind a computer, testing on the bench or presenting in the Board Room.
-Experienced designing and packaging Receivers, Synthesizers, LNAs and high linearity amplifiers, cavity filters, freq multipliers, PLLs, phase shifters, couplers, active filters, telemetry circuits, serial and parallel digital control, work with ADCs and DACs, FPGAs.
-Experienced Project Manager, Masters in Engineering Management.
-Experienced using and integrating all RF Test Equipment including Spectrum and Network Analyzers, Signal Generators etc.

Clearance: Active Secret Clearance

Frequency Electronics Inc. Uniondale Long Island, NY (Jan 2014 – present)
Sr Staff RF Microwave Design Engineer
-Sole engineer with total responsibility for Design, Analysis, and Test of a System comprised of Reference oscillators, PLDROs, LNAs, down-conversion, and L-Band amplifiers.
-Performed all Analysis, Wrote all Test Procedures, Authored all Design Review packages. Customer is Raytheon and FAA.
-Responsible working on the bench performing all alignment, Test, and delivery of circuits, modules, and Black Box Assemblies.
-Responsible for hands on Qualification Test of this unit/system comprised of Receivers, Synthesizers, DC Converters and Stable freq sources.

Lockheed Martin Corp Sr Staff RF Microwave Design Engineer Newtown PA (May 2012 – Jan 2014)
-Responsible for all aspects of black box design, analysis, documentation, and delivery of Satellite Receivers and Synthesizers.
-Designed Modules and Slices consisting of PLLs, Cavity BPFs, both high linearity amplifier chains and power amplifier chains on both hard and soft substrates.
-Designed Receiver with front end operating at Ka Band. Designed LNA with printed image BPFs in hermetically sealed package.
-Performed both design and hands on test of RF hardware. Responsible for all Budget, Schedule, and EV reporting, budget and schedule compliance.

Booz Allen Hamilton – Associate Level II Eatontown NJ (June 2005 – May 2012)
– Consultant to Army Responsible for Development of an anti IED DSP/RF system. Managed the DSP and FPGA design and development as well as performing RF Design of Front End and frequency synthesis circuitry, and performing assembly and test. Experienced in EV reporting and CAM Management.
– Consultant to Navy Provided technical expertise and contractor oversight during development of major satellite system. Involved in problem resolution for RF satellite from boxes and including Ka to UHF Down-converters, High Power Solid State Amplifiers, Diplexer and Antenna Systems, Satellite BUS, Payload and power distribution subsystems.

Princeton Optronics Inc. Lawrenceville NJ (Nov 2000 – May 2005)
-Program Manager Responsible for managing the development and fabrication of advanced tunable laser products. Worked with multiple PhDs and wafer processing and fabrication of advance high power VCSEL Lasers under DARPA funding.
-Sr Staff RF Design Engineer Responsible for Design, Fabrication, Test and Telcordia Qualification, of a line of High Volume Hermetically sealed chip and wire amplifiers operating from 10 Hz to 20 GHz.

Lockheed Martin Corp Newtown PA (June 1996 – Nov 2000)
-Sr Staff RF Microwave Design Engineer Responsible for all aspects of design and Development of Black Boxes for Satellite Applications.
-Designed advanced Receiver integrating MMICs and including agile analog PLLS using SPDs and conventional PFDs.
-Designed series of Low Noise Amplifiers (< 1 dB) -Designed Fast Hopping MLRS compatible Frequency Hopping Synthesizer comprised of Mix and Divide, Fast Settling PLLs with embedded DDS, cavity BPFs, FPGA control, packaging, and substrate layout. Performed all analysis, documentation, high level management and customer reporting, and authored all Test Procedures. -Wrote algorithms for complex FPGA control of frequency conversion from serial bus commands and oversaw FPGA development. -Designed multiple Receivers in 6-14 GHz range. Frequency Electronics Inc. Sr Staff RF Design Engineer Garden City LI NY (June 1993 – June 1996) -Responsible for Design, fabrication, assembly, documentation and test of Black Boxes for Satellite Applications, and all levels of Customer presentations and reporting. -Responsible for Design and Manufacturing of Hermetically sealed modules containing Low Noise (LNA) and Power Amplifiers. -Responsible for Design and manufacturing of high volume line of Cross Waveguide High Dynamic range Power Detectors. -Responsible for all analysis, Test Procedures, Documentation and manufacturing of Black Boxes including Power Amplifiers, 44 GHz Down-converters, and High Frequency Receivers. TRW Space and Defense Redondo Beach CA (July 1979 – June 1993) - Functional Manager RF Design Group (managed 8 engineers and 3 technicians) -Designed multiple Hermetic Chip and Wire Modules. -Designed High Speed hybridized Chip and Wire Hopping Synthesizer using Mix and Divide and PLLs. -Designed De Hopping triple down-conversion Receiver -Designed Broadband Channelized Receiver from 100 MHz to 18 GHz. -Subcontract Technical Manager (Managed procurement of black boxes for satellite payloads) -CAM Cost Account Manager for Development of Black Boxes for Satellite Applications from DC to 44 GHz. General Dynamics Corp. Pomona CA (June 1978 – July 1979) -Digital Signal Processing (DSP) Engineer responsible for development of multi card DSP system. Education MSEM NJIT GPA: 3.90 (of possible 4.0) Graduation: 12/2011 BSEE CNJ GPA: 3.21 (of possible 4.0) Graduation: 05/1978 Experience BACK TO TOP Job Title Company Experience Sr Staff RF Microwave Design Engineer Frequency Electronics, Inc. - Present Additional Info BACK TO TOP Current Career Level: Experienced (Non-Manager) Date of Availability: Within 2 weeks Work Status: US - I am authorized to work in this country for any employer. Active Security Clearance: Active Secret US Military Service: Citizenship: US citizen Target Job: Target Job Title: Sr RF Design Engineer Desired Job Type: Employee Desired Status: Full-Time Target Company: Company Size: Industry: Aerospace and Defense Occupation: Engineering • Electrical/Electronics Engineering Target Locations: Selected Locations: US-NJ-Central Relocate: No Willingness to travel: Up to 25% travel

  • Updated 8 years ago

To contact this candidate email

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.