George Simpson

930 East Main Street Apt 505 Lexington, South Carolina (478)244-9433 georgesimpson40@gmail.com

George Adam Simpson

Objective
I am seeking employment utilizing my CWI experience in the construction industry to assist in reaching the goals and objectives of a company as a Quality Control Manager.

April 2014 to Present Chicago Bridge and Iron/Westinghouse/Fluor
Georgia Power Plant Vogtle Nuclear Power Station Waynesboro, Ga.

Senior Quality Control Lead Inspector for Modules in Nuclear Island 3 & 4
• AWS Certified Welding Inspector 13100781 QA/QC CWI LEVEL III
• Level II Certification for S540 Stud Welding-Structural Module Shear Stud Welding
• Level II Certification for S561 Structural Weld Inspection-Modules and Fabrication and Submodule Assembly
• Level II Certification for S562 Pipe Welding/Brazing- ASME B31.1, Power Piping-Visual Weld Inspection in conjunction with F-M300 Mechanical Cleanliness
• Level II Certifications in SNT-TC-1A-VT NF/NG Supports
• Hilti Kwik Bolt Installation Training-Awareness CN-CONC-0003A
• Hilti Kwik Bolt Installation Training-Implementation CN-CONC-00031
• Hilti HAD Undercut Anchor System Setting Training-Awareness CN-CONC-0012A
• Hilti HAD Undercut Anchor System Setting Training-Implementation CN-CONC-00121
• Review of Unsatisfactory Inspection Reports prior to submitting reports to Field Engineering for disposition.
• Review Inspection Reports for closure after work is completed.
• Discuss problems and implement conclusions within my Quality Control group
• Review and approve Weld Data Sheets for field construction activities to begin
• Coordinate daily activities within my Quality Control group
• Assist with problem solving along with Field Engineering with documentation and work package issues
• Review Nonconformance and Disposition documents for implementation and conclusion of work
• Performed QA task such as surveillance reports, Nonconformance and Disposition reporting, inspection reporting, corrective action reporting and work package review and closure.
• Performed visual inspections on AP1000 Commodities and Systems; such as CA01, CA20 and CDS, in accordance with ASME B31.1 Section III, VIII and IX; AWS D1.1 and D1.6; and HEI.
• Assisted in writing Inspection Plans for various site procedures.
• Mechanical Inspection of ASME III component support location, orientation, torqueing, and cleanliness.
• Special Projects oversight on Critical Path for CA20.
• Special Projects risk assessment process for CA01.
• Welder Qualification per ASME IX, AWS D1.1, AWS D1.4, and AWS D1.6.
• Pressure testing in accordance with ASME B31.1, NFPA and AWWA.
• Make sure Weld Data Sheets and Welding Procedure Qualifications are correct and are being followed
• Follow a Safety Conscious Work Environment on a daily basis with a questioning attitude

2014 CCSI Georgia Power Plant Scherer
Power Plant Juliette, Ga

Quality Control Manager
• Daily weld inspections, weld mapping and radiography request forms of over 4300 welds on a Reheat and complete Cutont Bottom rebuild as per ASME Section VIII, AWS D1.1,D1.6,B31.1 and other applicable codes.
• Testing of welders as per ASME Section VIII
• Supervised four QC Inspectors on activities such as NDE oversite, insure that the welding procedures were adhered to also to be active in the safety program
• These are the same duties as with Fluor because Fluor lost the contract and I took the same job

2014 Fluor Georgia Power Plant Scherer
Power Plant Juliette, Ga

Senior Site Quality Control Manager
• Daily weld inspections, weld mapping and radiography request forms of over 4300 welds on a Reheat and complete Cutont Bottom rebuild as per ASME Section VIII, AWS D1.1,D1.6,B31.1 and other applicable codes.
• Testing of welders as per ASME Section VIII
• Supervised four QC Inspectors on activities such as NDE oversite, insure that the welding procedures were adhered to also to be active in the safety program

2013-2014 PPM Bridgestone Off Road Radial
Trenton, SC
QA/QC/CWI

• Document Control of and daily inspections of structural welding, reinforcement, placement and concrete acceptance, testing and placement of pipe welds
Review and revise Inspection Test Plans (ITP’s)

• Generating daily reports, repair progression reports, job quality analysis and daily ITP reports
• Testing of welders
• NDT (Non-destructive testing)
• Dye Penetrant Testing (with over 200 accumulative hours testing)
• Proficient in welding codes including but not limited to B31.1, B31.3, D1.1, Section IX, and VIII

2000-2010 PPM Georgia Power
Plant Scherer . Juliette, GA
Tube welder/Boilermaker/ QA/QC
• Welding horizontal superheat elements in tandem with 0.00 rejects
• Maintenance tube welder for 10 years
• Intermediate header, inspection and repairs
• Platen pendant inspection and repairs
• Reheat and cutont bottom welds 0.00 rejects
• Water wall panel replacement and overlay 0.00 rejects
• NDT testing of welds with 100 accumulative hours testing

2011-2012 Fru-Con Industrial Weyerhaeuser Paper Mill
Construction General Foreman
• Supervisors training on leadership and communication between Foreman and craft workers
• Supervision of 3 Crafts Foremen (Pipefitter and Welders, Riggers and Iron workers)
• Material take offs, expediting materials, rental of equipment, and Specific tooling for large and small diameter piping
• Coordinate installation of Steam Blow piping and restoration, Auxiliary Boiler Natural gas heat Exchanger and piping Units 4 and 5 turbine Building roof removal and installation and Site house keeping
• Conduct site safety audits with Safety Manager
• Conduct Quality Control inspections and coordinate third party inspections for RT,MT,and PT of pipe welding and structural welding
• Supervision over boiler inspections and repairs in and around boiler
Recovery Boiler/Power Boiler

Education
Macon County High School Montezuma, GA 1989-1993
CWI October 2013
References
References available upon request