Product Design Engineer
This resume has been forwarded to you at the request of Monster User xnerx03
emailed for l3, a long shot
Hong Liu Last updated: 08/24/15
Job Title: no specified
Company: no specified
Rating: no specified
Screening score: no specified
Status: no specified
Brooklyn, NY 11209
Contact Preference: Email
Quick View Links:
Resume Headline: Hong Liu – Electrical Design Engineer / Project Manager Resume Value: a3f7mwt6cag36d6x
433 101st Street. #3A
Brooklyn, NY 11209 email@example.com
OBJECTIVES: To obtain a challenging full time electrical engineering position involving products design and business development.
Microsoft Certified Systems Engineer, June 2000
M.S. Electrical engineering, Drexel University, June 1992
B.S. Electrical engineering, Lehigh University, January 1987
* Hands-on engineering activity and project management
* Medical and Dental product design/ modeling/ manufacturing
* Digital & Analog circuit design / fabrication / testing
* Circuitry design utilizing FPGA and CPLD and Microprocessor devices
* System evaluation, Testing and Integration
* Schematic capture and PCB layout
* Familiar with validation process and federal medical device requirements
* Specializing in sourcing and marketing components and products in China
* Certified machinist, expert operator of lathes and milling machines
WORK EXPERIENCE:[7/05 – Present] [Product Design Engineer] Parkell Inc.
Duties: Hands-on product design and develop cost effective and high quality dental devices from the perspective of practicing dentists to manufacturing. Work independently developing dental curing lights, pulp tester and laser surgical device from concepts to product release. All products are complying with federal/international regulations and quality standards. Responsible for blue tooth and radio software and hardware (analog, digital, mixed signal) design, circuit prototyping, testing, electro mechanical design, PCB design, embedded software, CPLD and building demonstration model. Technical writing for manufacturing procedures, ECO and technical specification, Assisting product documentations, 510K process, risk assessment and US/International medical electrical safety standards. Service customers worldwide via phone, email and in person. [1/02 – 7/05] [Electrical Design Engineer] Kerr Corporation
Danbury, CT 06819
Duties: Managing R&D laboratory. Design power management product. Responsible for writing product specification, circuitry and firmware (Motorola Controller and Xilinx CPLD/FPGA) design, PCB layout, testing/debugging, writing manual and production support. The product consists of voltage regulation, battery charger and radiometer. Technical field service and international marketing support. Served as liaison between client and product developers. [3/00 – 11/01] [Hardware Design Engineer] Cyberpath, Inc.
Piscataway, NJ 08854
Duties: Hardware/Circuit Design for VoIP project. Responsible writing board specifications, implementing effective architecture, circuit design, schematic capture, PCB layout, testing and delivery of a TDM bus based Ethernet/T1/E1/HMVIP management board. The board consists of PowerPC processor, PCI Bridge, line interface, digital transmission (DS1, DS3, E1 and HMVIP) interfaces, SDRAM, SRAM and Flash. Logic design targeted Xilinx FPGA and CPLD. Research network processors, cPCI bus and 10G Ethernet building blocks. [6/98 – 3/00] [Electrical Engineer] Vicon Industries Inc.
Hauppauge, NY 11788
Duties: Board level design of video/audio signal processing circuitry. Designed wavelet video compression PCI interface board. Writing design and test specifications, write VHDL code for DSP and Memory interface and combinational logic, schematic capture and PCB layout. The board consists of DSP, Video Codec, PCI Bridge, Memories and FPGA. Fabrication, modification and evaluation of electronic apparatus, components and circuitry for use in CCTV and video monitoring systems. Pre-sale technical support for China/Hong Kong/Taiwan customers and trade shows. Analytical troubleshooting of technical problems to component level. Prepare plans, specification and cost estimates for engineering assignments. [8/94 – 6/98] [Research Engineer] Skirball Institute of Bimolecular Medicine
NYU Medical Center, New York, NY.
Duties: Established and managed laboratory specializing in high resolution ultrasound and magnetic resonant imaging applied to biological systems. Worked and negotiated with test equipment and lab facility manufacturer’s representatives, purchasing equipment and setup ultrasound imaging facilities. Research and modification of high frequency ultrasound imaging scanner from 20MHz to 80MHz, Pulse Doppler systems and MRI coils for imaging the internal structural of biological tissues and study specific genetic relations. Interfaced with ultrasound systems and optical manufacturer’s design and sales staff relative to product implementation, new designs, product forecasting and marketing. Designed analog filters, motion control circuitries and Pre-amp circuitry. Constructed electrical circuits in hardware/software, wire-wrapping, prototyping and PCB layouts. Modified and repaired existing laboratory instrument and systems, designed and fabrication prototyping mechanical devices. Installed and configured computer systems/networks, and other communication devices in both hardware and software. Managing laboratory daily procedures, financial planning and souring project parts. [6/86 – 7/94] [Electrical Engineer] Telefactor Corporation.,
West Conshohocken, PA.
Duties: Research and design of analog/digital circuits (A/V processing) for medical monitoring systems. Designed (D/A – A/D) IBM-PC interface cards and computer programs, products packaging design and quality control, setup trade shows and instrument modifications due to customer requirements, vendors negotiation and documentation. Represented company in travel to Asia, providing services and instruction to existing customers and finding and establishing new dealer/representatives for product line, planning and coordination of China international trade exhibitions. Company made large sales in China due to my last few trips.
SPECIAL SKILLS: Fluent in Chinese and English. Computer languages: VHDL, Matlab, Cadence, Tango, PADs, C and Assembly languages.
HONORS: Member Phi Theta Kappa national honor fraternity.
PERSONAL: U.S. citizen. References from school work and previous employers can provided on request.
Experience BACK TO TOP
Job Title Company Experience
Electrical Design Engineer / Project Manager Parkell Inc. – Present
Additional Info BACK TO TOP
Current Career Level: Manager (Manager/Supervisor of Staff)
Years of relevant work experience: 7+ to 10 Years
Date of Availability: Within one month
Work Status: US – I am authorized to work in this country for any employer.
Active Security Clearance: None
US Military Service:
Citizenship: US citizen
Target Job: Target Job Title: Sr. Electrical Engineer / Project Manager
Desired Job Type: Employee
Desired Status: Full-Time
Target Company: Company Size:
Industry: Electronics, Components, and Semiconductor Mfg Medical Devices and Supplies
• Electrical/Electronics Engineering
Target Locations: Selected Locations: US-NY-New York City
Willingness to travel: Up to 25% travel
Languages: Languages Proficiency Level