Israel Márquez Jr. 10423 Bulwark Peak
Converse, TX 78109
Certified Welding Inspector 15011521 Cell Phone 575-631-3604
OBJECTIVE: Seeking challenging inspection position that uses my welder and quality assurance experience.
•• Vendor surveillance for Chesapeake Midstream, Access Midstream and Williams. 2012-2016
•• Employed by Tulsa Inspection Resources October, 2012-Present
•• Employed by Leedon Inspection July, 2012-October, 2012.
•• Shop Welder: Construct new oilrigs according to approved drawing. Structural welding and pipe fitting and
welding experience. Experience with FCAW, SMAW, GMAW, GTAW, and downhill pipe.
NONDESTRUCTIVE TESTING PROCESSES:
•• 60 hours ultrasonic, 60 hours radiation safety, 60 hours visual and leak testing
•• 20 hours film interpretation, 20 hours liquid penetrate testing
•• 40 hours magnetic particle testing, 60 hours eddy current, all in accordance with ASNT SNT-TX-1A.
QUALITY ASSURANCE & QUALITY CONTROL:
•• 15 hours math and symbols, 40 hours application of codes and specifications
•• 60 hours metallurgy and destructive testing, 60 hours analysis of drawings and fabrication processes
•• 60 hours communication, record keeping and reporting, 60 hours quality management techniques
WELDING SKILLS & CAPABILITIES:
•• Utilized E-6010, E-7018 E-7024, E-308, E-309L, ER4043 & ER6061 rods & electrodes
•• Welded structural steel in the following positions: 1F, 2F, 3F, 4F, 1G, 2G, 3G, & 4G
•• Welded plate & structural steel in accordance with ASME Section IX & AWS DI.I
•• Welded stainless steel in accordance with Military Standard 1595-A
•• Cut, prepared & fitted segments of carbon steel pipe, plate, and structural metal
•• Welded 2”-6” pipe in accordance with ASME Section IX & API 1104
•• Welded 2”-6” pipe in the following positions: 2G, 5G, & 6G
PROFICIENT WITH THE FOLLOWING WELDING PROCESSES: PREPARED & CUT METAL USING:
•• GTAW-Gas Tungsten Arc Welding (TIG or Heliarc) •• Air Carbon Arc Gouging
•• SMAW-Shielded Metal Arc Welding (Stick) •• Watts Beveling Machines
•• GMAW-Gas Metal Arc Welding (MIG) •• Oxyfuel-Hand Torches
•• FCAW-Flux Core Arc Welding •• Plasma Arc
11/12 to Present Tulsa Inspection Resources Texas
• Weld inspection, daily reports. General exams, dimension check, Hydrostatic and Pneumatic test
witnessing, sandblast verification, Primer wet mil and dry mils verification, top coat wet mil and dry mil
verification, final reports. Audit entire job data books per customer specification. Including but not limited
to reviewing RFQ, MTR’s, weld maps, WPQ’s, NDE records, etc. Construction and inspection to ASME
Section VIII Division I. B31.3 Normal Fluid Service, B31.3 Severe Cyclic, and AISC.
07/12 to 11/12 Leedon Inspection Houston, TX and surrounding area
• Weld inspection, daily reports. General, dimension check, Hydrostatic and Pneumatic testing, sandblast
verification, Primer wet mil and dry mils verification, top coat wet mil and dry mil verification, final
reports. Audit job data books. Review MTR’s for Bill of Materials, weld maps, WPQ’s, NDE records, etc.
Construction and inspection to ASME Section V Division I. B31.3 Normal Fluid Service, B31.3 Severe
06/12 to 07/12 Watson Hopper Hobbs, NM
• Build carriers starting with the chassis. Welding, fabrication. Testing welders. 1F, 4F, 5F
01/12 to 06/12 Valmont New Mark Tulsa, OK
•• Weld utility pole shafts to base plates and all brackets and connections. Ultra sound testing upon
completion. MIG, Metalcore, 1G
•• Eligible for rehire
11/11 to 12/11 Thermal Engineering Sapulpa, OK
• Welded pressure vessels. D1.5
• Eligible for rehire.
02/11 to 10/11 Watson Hopper Hobbs, NM
Welder: Fluxcore, E7018
•• Finish assigned building projects on time, which consisted of welding, measuring, fitting, fabricating
according to the approved drawing.
1F, 4F, 5F
Eligible for rehire.
VOCATIONAL TRAINING & EDUCATION:
Tulsa Welding School Tulsa, OK
•• Completed in an intensive 14-month, 1500-hour, welder-training, quality assurance, quality control
and nondestructive program. Associates Degree in Welding Technology G.P.A. 3.8, 100% attendance
Hobbs High School Hobbs, NM
•• Graduated and received diploma (2008) G.P.A 3.3
To contact this candidate email email@example.com