JASON HOW

JASON TANG HOW
Phone: 954.649.5928 Email: jtanghow01@gmail.com

PROFILE
Quality Control Inspector, Certified Welding Inspector, and Construction Manager with a proven record of success as a
contributor to important infrastructure projects including new construction as well as renovation projects. Highly knowledgeable of
AWS D1.1, ASME Boiler & Pressure codes, PED, API and ASME Process Piping B31.3 codes, exceptional project management skills,
especially successful in management roles that demand rigor, a high level of drive and dedication and a focus on delivering business
outcomes using methodologies. Areas of strength encompass:

• Structural Steel Welding & Fabrication • Design and Builds • Blueprints Analysis
• Inspection, Compliance and Flaw Detection • Work Order Specifications • Reports/Documentation
•Client Relations • Performance Testing • Construction Management
•Basic Electrical Knowledge • ISO 9001 •Pipe Fabrication
•SPOT •Procore

Possess a unique blend of technical expertise, exceptional leadership skills, and track record of excellence, providing highly
specialized service. Analytical problem solver, able to foresee issues and create new systems that streamline operations, resolve
concerns and improve efficiency. Outstanding record of meeting budgetary, schedule and performance requirements. Committed to
superior quality control and finishes, exceptionally driven to exceed client expectations.

EDUCATION AND CERTIFICATIONS
-Bachelor of Business Administration Degree in International Business, Florida International University, Miami, FL
Semester abroad in China with emphasis on conducting business in Asia

-AWS Certified Welding Inspector (CWI)
-TWIC Card
-NACE LEVEL I
-NDT Film Interpretation Level II

PROFESSIONAL EXPERIENCE
Magnolia Rivers (New Jersey) 10/2019 – Present
• CWI QA INSPECTOR/Auditor
Monitor the execution of fabrication work in progress relating to the fabrication of the 30" Natural Gas Pipeline and ensure that it
complies with applicable codes, standards, and New Jersey Natural Gas requirements .

• Review and accurately interpret specifications, engineering drawings and work instructions for a product from inception to
completion.
• Inspect/examine products and materials for defects or deviations from specifications.
• Receive in material and Log into SPOT Program
• Perform inspection as defined by the work instructions and any other instructions for the job assigned.
• Client-oriented approach with emphasis on understanding and fulfilling the needs of the client
• Strict technical specification and application/customer requirement compliance during production.
• Ensure welds are performed per all applicable welding procedures and requirements by perform Weld Audits on all Welders.
• Create and log welds into the SPOT program.
• Creating Weld maps and as built.
• Inspecting the installation of Pritec wrap on the welded part of the pipeline.
Jason Tang How • 954.649.5928 • jtanghow01@gmail.com •

Construction Testing Services (Las Vegas) 01/2019 – 10/2019
• CWI QA INSPECTOR
Monitor the execution of fabrication work in progress relating to the fabrication of the structural steel for the new Raider Stadium and
ensure that it complies with applicable codes, standards, and specific client requirements
*Clark County Approved Structural and Welding Inspector.
• Review and accurately interpret specifications, engineering drawings and work instructions for a product from inception to
completion.
• Inspect/examine products and materials for defects or deviations from specifications.
• Responsible for identifying nonconforming product and initiating Non-Conformance Reports (NCR's) as needed for a product
not meeting standards set.
• Coordinate with the contractor and their quality control team and provide early warning of potential quality problems.
• Perform inspection as defined by the work instructions and any other instructions for the job assigned.
• Client-oriented approach with emphasis on understanding and fulfilling the needs of the client
• Strict technical specification and application/customer requirement compliance during production.
• Ensure welds are performed per all applicable welding procedures and requirements.
• Responsible for ensuring that all steel fabrication are in accordance with the general arrangement and drawings/project
specification.
• Document inspection results by completing reports and logs; summarizing re-work, inputting data into the quality database,
maintain quality records and accurately complete paperwork for quality tracking.

Zachry Industries (Freeport, TX) 07/2018 – 01/2019
• CWI QA/QC INSPECTOR
Monitor the execution of fabrication work in progress relating to pressure vessels and pipe spool fabrication to ensure that it complies
with applicable codes, standards, and specific client requirements
• Inspected Polyurethane Fusion Welding.

• Review and accurately interpret specifications, engineering drawings and work instructions for a product from inception to
completion.
• Inspect/examine products and materials for defects or deviations from specifications.
• Responsible for identifying nonconforming product and initiating Non-Conformance Reports (NCR's) as needed for a product
not meeting standards set.
• Coordinate with various contractors and their quality control team and provide early warning of potential quality problems.
• Perform inspection as defined by the work instructions and any other instructions for the job assigned.
• Client-oriented approach with emphasis on understanding and fulfilling the needs of the client.
• Responsible for the use and basic care of calibrated inspection, measuring and testing equipment and devices in the
verification and evaluation of the product.
• Strict technical specification and application/customer requirement compliance during production.
• Ensure welds are performed per all applicable welding procedures and requirements.
• Responsible for ensuring that all piping fabrication and handling of spools and installation are in accordance with the general
arrangement and isometric drawings/project specification.
• Document inspection results by completing reports and logs; summarizing re-work, inputting data into the quality database,
maintain quality records and accurately complete paperwork for quality tracking.

Tang How Brothers Inc. (Pembroke Pines FL.) 11/2017 – 06/2018
• CWI QA/QC Inspector
Monitor the execution of fabrication work in progress relating to structural steel and pipe to ensure that it complies with applicable
codes, standards, and specific job requirements.
• Prepare Procedure Qualification Records (PQR) to B31.3 and AWS D1.1 code.
• Qualify welders to Welding Procedure Specification (WPS) to ASME Section VIII and AWS D1.1 code.
• Interpret engineering drawings of the structural steel to carry out visual checks on steel structures and piping.
• Interpret engineering drawings to assess the NDE requirements for pressure vessels and tolerances of fitment.
Jason Tang How • 954.649.5928 • jtanghow01@gmail.com •

• PROFESSIONAL EXPERIENCE – (CONTINUED)

Keep track of all NDE activities and review all NDE results.
• Map and record all heat numbers on engineering drawings for all material used for fabrication of the vessel.
• Map welding stamps on engineering drawings for fabrication of the vessel.
• Responsible for qualifying welders: welders qualified by performing successful Visual Testing and Bend tests according to
ASME Section VII and AWS D1.1.
• Work with fabrication/production team to implement any necessary repairs.

Merichem Company (Houston, TX.) 07/2015 – 09/2017
• QA/QC CWI Inspector
Monitor the execution of fabrication work in progress relating to pressure vessels, pipe spool fabrication and structural steel of skids to
ensure that it complies with applicable codes, standards, and specific client requirements.
• Review and accurately interpret specifications, engineering drawings and work instructions for a product from inception to
completion.
• Inspect/examine products and materials for defects or deviations from specifications.
• Responsible for identifying nonconforming product and initiating Non-Conformance Reports (NCR's) as needed for a product
not meeting standards set.
• Coordinate with various contractors and their quality control team and provide early warning of potential quality problems.
• Communicate with the Project Manager, fabrication shops, contractors, and other third parties to resolve schedule issues.
• Communicate with the Project Manager to determine the specific requirements of a given work order, including the scope of
work, deliverables, schedule, and budget for assignments.
• Perform inspection as defined by the work instructions and any other instructions for the job assigned.
• Client-oriented approach with emphasis on understanding and fulfilling the needs of the client.
• Responsible for the use and basic care of calibrated inspection, measuring and testing equipment and devices in the
verification and evaluation of the product.
• Conduct detailed quality inspection of product using tools such as measuring tapes, micrometers, calipers, and gauges.
• Perform inspections, witness and approve Factory Acceptance Tests (FAT's) according to client specification, and approved
drawing. Travel to fabricators site to attend and witness hold points inspection where needed, customer acceptance testing
and evaluating & troubleshooting performance issues both locally and globally.
• Approve incoming materials, in-process production, and finished products by confirming specifications; conducting visual
and measurement tests; rejecting and returning unacceptable materials; communicating required adjustments to production
supervisor; returning products for re-work and confirming re-work.
• Prepare National Board U1-A forms.
• Interact with Authorize Inspector (AI) as needed.
• Generate WPS for Merichem, review and approve suppliers WPS's.
• Perform verification of PWHT reports with respect to procedures (ITP) and project specifications.
• Arrange and co-ordinate NDT activities, evaluate NDT results (PT, MT, RT & UT) as well as interpretation of radiographs
• Responsible for ensuring that all piping fabrication and handling of spools and installation are in accordance with the general
arrangement and isometric drawings/project specification.
• Document inspection results by completing reports and logs; summarizing re-work, inputting data into the quality database,
maintain quality records and accurately complete paperwork for quality tracking.
• Reconcile final inspection documentation for shipments.
Track suppliers' performance related to quality.
• ISO 9001 knowledge.
• Working knowledge of PED.
• Contribute with ISO 9001 internal audits.
• Maintains safe and healthy work environment by following standards, policies, and procedures.
• Updates job knowledge by participating in educational opportunities; reading technical publications.
• Proactively participates in Merichem Safety Programs.
Jason Tang How • 954.649.5928 • jtanghow01@gmail.com •

PROFESSIONAL EXPERIENCE – (CONTINUED)

AF Global Company (Houston, TX.) 12/2014 – 07/2015
• Lead Quality Control Inspector
Monitor the execution of fabrication work in progress relating to pressure vessels to ensure that it complies with applicable codes,
standards, and specific job requirements.
• Prepare Procedure Qualification Records (PQR) to ASME Section VIII and AWS D1.1 code.
• Qualify welders to Welding Procedure Specification (WPS) to ASME Section VIII and AWS D1.1 code.
• Interpret engineering drawings of the pressure vessel to carry out visual checks for the orientation of clips, nozzles and
other attachments on the vessel. Check layout and fit up of nozzles, clips, and heads on the vessel. Check projections, two-
hole level on flanges and elevation of nozzles and clips.
• Interpret engineering drawings to assess the NDE requirements for pressure vessels and tolerances of fitment.
• Write up all shooter sheets for NDE (RT, MT, PT, and UT) for pressure vessels according to the job specification.
• Keep track of all NDE activities and review all NDE results.
• Map and record all heat numbers on engineering drawings for all material used for fabrication of the vessel.
• Map welding stamps on engineering drawings for fabrication of the vessel.
• Gather pressure vessel data and information in the field; perform visual inspections and recording data and information to
assure pressure vessels files are current
• Responsible for qualifying welders: welders qualified by performing successful Visual Testing and Bend tests according to
ASME Section VII and AWS D1.1.
• Assist with routine inspection activities such as witnessing hydro tests.
• Plan and schedule pressure vessels inspections and when necessary make repair recommendations.
• Work with fabrication/production team to implement any necessary pressure vessel repairs.

Tang How Brothers, Inc. (Pembroke Pines, FL.) 05/2007-11/2014
• Project Manager/Welder/Fabricator
Involved in the complete project lifecycle for new construction projects as well as renovations. Areas of accountability include design,
fabrication project administration, scheduling, materials management, quality control, safety, and subcontractor administration.

• Certified AWS 6G Welder and accomplished team leader, adept at managing diverse teams to deliver top performance.
• Develop strong relationships with customers to ensure prompt response and manage expectations.
• Proven ability to coordinate all aspects of projects, as well as lead, direct and motivate staff to accomplish goals.
• Outstanding record of meeting budgetary, schedule and performance requirements.
Miramar Water and Sewage Treatment Plant – New Rollers for a Floating Roof & New Rail System
• Designed new rollers for a floating roof of an ethanol tank.
• Allocated a machine shop to assist in the design and fabrication of rollers.
• Met with plant engineers to approve the new design of rollers and the use of a stronger material for the liner.
• Ensured all safety measures were taken while work was being performed on the tank roof.

Miramar Water and Sewage Treatment Plant – New Rail System
• Met with plant engineer to design a new rail system for submergible pumps to be lowered and raised.
• Calculated a budget to remove the existing system and install the new system. Formulated a project schedule and sourced all
necessary equipment needed for the project.
• Oversaw daily safety meetings with the crew and daily progress reports to ensure the project was on schedule.
• Held a project completion follow-up meeting to ensure all client requirements were met and the new system was operating properly

Broward College
• Assisted in the design and fabrication of over 2,000 feet of aluminum guardrail along a path of a new building.
• Ensured all rails were to code height specifications and communicated with the client to ensure all demands were met.
• Managed the team that installed the rails, ensuring they were free from paint and weld defects.
• Delivered project on time and within budget.
Jason Tang How • 954.649.5928 • jtanghow01@gmail.com •

PROFESSIONAL EXPERIENCE – (CONTINUED)

Adrenalina at Gulfstream Park & Passion Night Club at the Hard Rock Café in Hollywood, FL

• Assisted with managing a new construction project for Adrenalina, an indoor activity park and for Passion Night Club
• Responsible for fabrication of all roof openings and storefronts as per drawings for Adrenalina.
• Ensured all changes were made and all work was completed with the highest quality.
• Supervised the fabrication and installation of stairways, mezzanine floor, balcony and all handrails for Passion Night Club.

Water and Power Authority of St. Thomas, USVI
• Oversaw and coordinated the repairs to the boiler at the Water and Power Authority in St. Thomas, USVI.
• This was an emergency job, so we had two shifts working 24/7 to bring the boiler back online before the storage tanks ran out.

COMPUTER SKILLS
Microsoft Office (Word, Excel, PowerPoint, and Outlook), QuickBooks, Procore and Oracle.

  • Updated 3 years ago

To contact this candidate email jtanghow01@gmail.com

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.