jiayu li

238, Silverado Bank Circle SW
Calgary, AB T2X
Phone: (403) 692 3221
Cell: (403) 470 0989
E-mail: jiayu_li2001@yahoo.ca
• 20 years’ work experience of instrumentation and control systems
• Instrumentation selection, sizing and specifications
• Experience on instrument communication network including Ethernet, Foundation Field Bus, Modbus , Profibus
• Practical experience with PLC/SCADA, DCS programming and HMI configuration
• Practical Experience in projects for oil/gas, petrochemical, chemical and power industries and water/waste water treatment plants
• Piping and instrumentation diagrams (P&IDs) development
• Design and implementation of instrumentation and control (I&C) system
• Involved in full life cycle of instrumentation and control system engineering including scoping study, design basis memorandum, design review, HAZOP/LOPA, cause and effect diagram, control narrative, detailed design
• Control panel and power distribution Panel Design
• PLC/DCS Loop wiring and cable termination
• Motor control schematic drawing
• Cable sizing/scheduling
• 2- and 3-dimensional AutoCAD and MicroStation drawings design and drafting
WSP Canada Inc, Calgary, Alberta
Husky Energy – Rush Lake SAGD Project
Husky Energy – Edam East SAGD Project
Husky Energy – Vawn SAGD Project
• Prepared and generate material requisition for instruments
• Sized and selected process control instruments
• Prepared and generated instrument datasheets
• Reviewed and provided inputs for Piping and Instrumentation Diagrams (P&IDs) development
• Implemented HAZOP/LOPA resolutions
• Addressed technical queries
• Participated in Technical Bid Evaluation (TBE) for instrumentation
• Reviewed vendor’s submission
• Generated instrument Materials Take-Offs (MTOs)
• Developed installation detail and wiring diagram
• Addressed field contractor technical queries on installation
TransCanada – Maple Compressor Station
Spectra Energy – Union Gas GTA natural gas distribution
• Prepared and generated instrument datasheets
• Developed instrument index
• Developed cost estimates for instruments

Associated Engineering, Calgary, Alberta, Canada
City of Calgary – Glenmore Water Treatment Plant Upgrade
• Developed design drawings, including DCS wiring diagrams, floor plans, cross sections, installation details, and Process and Instrumentation Diagrams (P&IDs),Single line Diagrams
• Worked on communication network, including Ethernet, Foundation Field Bus, Profibus and Modbus
• Developed architecture drawings for Distributed Control System/Programmable Logic Controller (DCS/PLC) system
• Developed junction box and instrument loop drawings
• Designed control panel
• Prepared and generated instrument datasheets
City of Calgary – Bearspaw Water Treatment Plant Upgrade
• Completed Electrical, Instrumentation and control (EI&C) as-built drawings
• Developed communication network
• Developed instrument loop drawings
City of Calgary – Calgary Transit Security Upgrades
• Designed and drafted building internal and external lighting layout drawings
• Drafted CCTV , fire, smoke detector, alarm system layout and control schematics
• Created site drawing for cable running and gate controls
• Developed building access security system drawings
Alberta Transportation – Nose Hill Drive Interchange
• Created street lighting drawing utilizing city map
• Drafted light poles installation details
City of Red Deer – Wastewater Treatment Plant Upgrade
• Collected and compiled existing plant instruments and control system data
• Drafted a Profibus communication system to replace the existing instrument cable system
City of Calgary – Water Pumping Station
• Designed and drafted power distribution and control panel layouts
• Drafted pump control schematics
City of Medicine Hat – Wastewater Treatment UV facility
Municipal District of Taber, Hamlet of Grassy Lake Waste Water Treatment Online Monitoring
Town of Taber Wastewater Treatment Plant Upgrade
Coyote Creek Golf and RV Resort (Phase 3 RV Condominium WTP)
• Drafted instrumentation & control layout drawings
• Developed piping & instrumentation diagrams (P&IDs)
• Create PLC wiring diagrams
• Drafted installation details
• Control Panel design
• Cable sizing/scheduling
• Drafted single line diagrams and motor control schematics
Calgary Airport Authority – Airport Tunnel
• Drafted tunnel lighting drawings
• Prepared power distribution drawings
• Designed control panel
Alberta Transportation – Stony Trail Road Construction Management
• Drafted road drawings
• Provided site inspection service

ELECTRICAL TECHNICIAN 05.2005 to 08.2006
BABCO Electric Group INC, Edmonton, Alberta
• MCC, switchgears, softstarter VFD and instrumentation control panel assembling, testing and wiring

Xi’An Instrument (Group) Co., Xian, China
Cityof JinZhou – JinZhou Water Network Monitoring System (SCADA)
Cityof Urumiqi –Urumiqi Centralized Heating System(SCADA)
SINOPEC Qilu Petrochemical Company – Ionic membrane caustic soda/Vinyl chloride, thermal power plant projects
• Instruments selection, material requisition and bidder evaluation
• Prepared Materials Take-Offs (MTOs) for instruments
• Developed control philosophy
• Developed control narratives and cause-effect diagrams
• Generated I/O points for control system
• Completed PLC/DCS programing and commissioning
• Integrated SCADA and RTU system and commissioning
• Developed instrument loop, logic and installation diagrams
• Completed Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for control systems

COMPUTER PROGRAMMER 09.1990 to 07.1997
Xi’An Instrument (Group) Co., Xian, China

Data Acquisition System
• Wrote codes based on Visual Basic (VB) language
• Conducted testing and commissioning
Products Information Management System
• Developed products database
DCS Configuration Software
• Participated in the development of Distributed Control System


• Certificate of Electrical Design, Southern Alberta Institute of Technology, Canada 2008
• Diploma of Instrumentation Engineering Technology, Northern Alberta Institute of Technology, Canada 2005
• Bachelor of Computer Science, XiDian University, China 1990

• PH, Chloride, Conductivity, Turbidity Analyzers 2011
• ELECDES 2010
• Profibus/Smart MCC (Siemens) 2009
• Bentley AutoPLANT 2008

• Member of ASET

• Compter Skills: AutoCAD, MicroStation, PLC, SCADA, DCS (DeltaV), HMI (iFix, Wonderware), Visio, Bentley, AutoPLANT, Microsoft Office, AVEVA, InTools
• High efficient time management skills
• Proven communication skills
• Organization skills
• Learning skills

  • Updated 7 years ago

To contact this candidate email jiayu_li2001@yahoo.ca

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.