Jose Barreiro

Jose G. Barreiro, PE
Project Manager

EDUCATION Florida Institute of Technology – Melbourne, FL
B.S. Mechanical Engineering

PROFESSIONAL
EXPERIENCE Barry-Wehmiller Design Group, Inc. (6/2013 to Present)

Responsible for managing project teams to successfully meet or exceed client
expectations for scope, quality, schedule and cost. Align project scope of work
and deliverables with commercial terms and conditions. Initiate project success
with development and implementation of project quality and execution plans
(PQP/PEP). Align mechanical design, control systems integration,
commissioning and qualification activities for Design Group and client.

SUMMARY
Licensed Mechanical Engineer with over fifteen (15) years of engineering and
management experience. Familiar with the development and execution of
operational strategies utilizing Total Quality Management principles. Experience
includes capital project management, vendor management, equipment/process
upgrades including qualification and validation, as well as process improvement
initiatives. Experienced on leading technical teams and managing cross-
functional and complex projects with significant business impact.

Experienced in facility design, building codes and standards, engineering
infrastructure, mechanical and electrical maintenance, safety and quality
management, regulatory compliance, policy and procedure development, process
improvements, program and financial management. Business development,
proposal/quote generation.

KEY PROJECTS
Miller Coors Shenandoah – Elkton, VA

Conducted electrical survey in order to produce MCCs and PDPs documentation.
Loads to motors and equipment were traced out. All medium voltage distribution
routes and circuits were walked and documented. This is still an on-going
project.

The Schwan Food Company – Stilwell, OK

Conducted a facility mechanical assessment as part of a multi discipline effort in
order to assist the client in a Capital Grade Estimate for a future expansion at the
facility. An evaluation of existing mechanical utility systems (ie. steam,
compressed air, city water) in terms of current conditions, current capacity vs
future capacity load, to then provide recommendations on upgrades, if applicable.
Engineering calculations were performed as part of the evaluation (ie load,
capacity, volumes).
10118 Oak Saddle, San Antonio, TX 78254 * (787) 568-2924 * jbarreiro@coqui.net
JOSE G. BARREIRO, PE
PROJECT MANAGER

Constellation Brands – Piedras Negras, MX

Led PM efforts for the installation of 2 new BEMA Stretch Wrappers and the
relocation of an existing BEMA Stretch Wrapper on Lines 3 and 4. Bid process
for the hiring of local labor for the mechanical, electrical and network (fiber
optics) installation works. FAT documentation approval prior to testing at OEM
plant. OEM contracting for palletizer and stretch wrapper works (ie installation,
programming, start/up & commissioning). Coordinated with contractors the
disassembly and, then, installation of stretch wrappers. Coordinated LOTO
procedure and adherence on utilities (ie. electrical, compressed air) during new
electrical feeds installation, new breaker installation, and new compressed air
lines installation. Ensured project was kept within scope, budget and time
constraints. Generated daily reports. Finished project successfully within time,
schedule and budget.

Constellation Brands – Piedras Negras, MX

Led PM efforts to the relocation of 4 stretch wrappers to Lines 5 and 6.
Coordinated with contractors the disassembly and, then, installation of stretch
wrappers. Coordinated LOTO procedure and adherence on utilities (ie.
electrical, compressed air) during new electrical feeds installation, new breaker
installation, and new compressed air lines installation. Managed programming
efforts with depalletizer and stretch wrapper manufacturer’s technicians. Made
sure project was kept within scope, budget and time constraints. Generated daily
reports. Finished project successfully within time, schedule and budget.

Constellation Brands – Piedras Negras, MX

Provided mechanical installation support to the Intelligrated full case conveyor
line. Supervised local trades contractors to ensure installation was being
performed as per conveyor design requirements and manufacturer
recommendations. Also, provided support with the line full case inspector
installation and shipping / arrival coordination. Coordinated with the plant’s
PMO office tasks that required their approval. Assisted the plant’s PMO office
with the equipment as-built drawings to be submitted for Mexico’s
Environmental permit, due to its radioactive components.
Assisted mechanical process with piping installation including contractor
coordination for installation.

The project included preliminary engineering, detailed design, procurement and
installation services providing a turnkey approach for the implementation of a
new high speed Beer Packaging Can Line. $50MM project (projected).

Pepsi – Cidra, Puerto Rico

Concept development that lead to proposal/quote for services.
Led efforts to a risk assessment executed on the existing CIP Systems at the Main
CIP Room, Pepsi Flavors Room, Pepsi Room, Tank Farm and Filling Lines at the
Cidras, Puerto Rico site. To help analyze risk, we used a matrix system in which
Numerical and alphabetical scores were given to the consequence and likelihood

10118 Oak Saddle, San Antonio, TX 78254 * (787) 568-2924 * jbarreiro@coqui.net
JOSE G. BARREIRO, PE
PROJECT MANAGER

of risk and the scores were then used to get a rating of the risk from risk analysis
matrix as described in PEPSICO EHS STANDARD 10 – Risk Management.

Mylan – Caguas, Puerto Rico

Responsibilities included the coordination and review of facility design (DG
Facilities Solutions) and stamping of drawings. Participated in the sub-contractor
qualification, bidding and awarding of the contract to the installation contractor.
Developed proper documentation to generate construction permit for
commencement of project. Responsible for site management, including
coordination of daily project activities, and interface with client and contractors
on a daily basis. Oversaw safety compliance and training of professionals and
contractors throughout the project. Routed submittals for engineering review and
resolution, attended weekly meetings to discuss project progress and schedule
status/issues.

The project included preliminary engineering and detailed design for the
necessary facility modifications to support the installation of new processing
equipment for oral solid dosage products and to provide the necessary utility
services to the equipment. Construction services were also provided, including
sub-contracted labor and site management for the proper implementation at the
site. Processing equipment included a Despatch Oven and a Thomas Engineering
Tablet Coater, a Munters AHU (dryer), a 40-ton Trane Air-Cooled Chiller and a
Donaldson Dust Collector.
PRIOR
EXPERIENCE Trane Commercial Systems – San Juan, PR (6/2011 to 6/2013)

Worked closely with project engineers, estimators, and general contractors on
all project deliverables. Responded to all queries on systems, products, quotes,
and contracts. Ensured quality workmanship and sustained client satisfaction.
Served as a valued technical resource liaison to customers and staff on all
project deliverables and consistently met all project timelines and budgets.
Created and generated project proposals for equipment, controls, and services.
Prepared and generated contracts and maintained business records. Serviced
and maintained existing accounts while applying strategic plan of actions to
grow business. Consulted with clients on product needs and budgets.
Conducted walkthroughs and reviewed/assessed construction plans for HVAC
system design and installation. Recorded pertinent data and disbursed account
business activity reports and annual forecasts for financial and performance-
based solutions. Completed intensive company training and acquired multiple
certifications in HVAC system design, installation, and servicing.

Caribbean Waste Consultants Inc. – Carolina, PR (2/2002 to 6/2011)

Managed staff and operations for all waste management consulting projects and
initiatives. Sourced and secured clients, facilitated positive business
relationships, and led complex assignments from start-up to final conclusion.
Supervised contracted labor, coordinated and inspected installation of waste and
recycling equipment with vendors and/or suppliers, and accountable for
10118 Oak Saddle, San Antonio, TX 78254 * (787) 568-2924 * jbarreiro@coqui.net
JOSE G. BARREIRO, PE
PROJECT MANAGER

employee safety and proper equipment operation. Oversaw all project
specifications in accordance of client’s EHS Program and ensured regulatory
compliance with OSHA mandates and federal laws. Planned, coordinated and
facilitated all logistics requirements on commodities export (i.e., newspaper and
cardboard) including booking, transport, pick-up, and overseas shipping.
Directed key project that consisted of establishing a more efficient waste and
recycling management program for client that resulted in significant cost savings
while meeting current state and federal laws/regulations. Created and delivered
Decommissioning (AutoClave and RotoClave) solutions to specific clients that
provided means for them to efficiently manage expired and/or damaged products,
as well as regulated medical waste. Generated on average savings of $800K+ per
client and project.

IMC Innovations, INC. – Manati, PR

Managed and directed staff and operations for a major re-validation project of
HVAC system in Merck, Sharp & Dohme’s Arecibo Plant. Planned and
conducted systems’ evaluation, Corrective Maintenance, Preventive Maintenance
as per cGMP practices, and ran IQ, OQ, and PQ. Facilitated equipment
integration following Maximo’s PM and/or CM schedule. Recorded and reported
on results. Accountable for validation of all Laboratory Equipment and Devices
in Ortho Biologic’s Manati Plant. Provided documentation on validation results
for management approval. Ran multiple critical tests utilizing Validator 2000.

TECHNICAL
SKILLS Licensed Professional Engineer (PE) – Puerto Rico and Texas
Refrigeration Fundamentals ( Refrigeration Basics, Refrigeration Piping,
Refrigeration & Our Environment)
Product Fundamentals (AHU, WSHP, RTU, Chillers, Fan Coils, UV)
Energy Efficient D e s i g n Fundamentals’ (Chiller-Side, Air-Side, System
Controls, and Energy Recovery)
Completed PMP (Project Management Professional) Certification Prep
Course.
PMP Certification – January 2016 (projected)
MS Project 2010
MS Office Suite (Word, Excel, Powerpoint)
NCEES Record

LANGUAGES Fluent in English and Spanish

PROFESSIONAL
AFFILIATIONS Member of College of Engineers and Surveyors of Puerto Rico (CIAPR)
Texas Board of Professional Engineers (TBPE)

10118 Oak Saddle, San Antonio, TX 78254 * (787) 568-2924 * jbarreiro@coqui.net