5196 North Shannon Road, Shannon, NC.28386
Over 20 years in Instrumentation and Electrical Maintenance. Expertise consists of designing, building, and installing fully functional control systems at NEC and NIST specifications.
* Electrical/Electronic Troubleshooting * Air Operated Valves
* Transmitters Calibrations * Pneumatic Controllers
* Fluke 754 * Tubing and Conduit Bending
* Shooting Loops * RS Logixs Software
* Hart communicator Setup * DCS software
11/17/2015 to 03/03/2016 GP Strategies,Escondido CA 92029
Instrumentation and Controls Worked as an Instrumentation and Electrical Engineer at an LNG Plant located at Miami,Florida
11/02/2015 to 11/13/2015 Florida Power and Lights
Instrumentation and controls Worked at an outage at turkey point nuclear plant
09/29/2015 to 10/23/2015 BHI Energy / Power Services, Piedmont, SC
Instrumentation and Controls Worked at Millstone Nuclear Plant in Waterford, CT. Assisted with the refuel outage. The equipment that I became very familiar with was the 2500 Series Level-Trol Controllers
08/26/2015 to 09/03/2015 Tradeforce Staffing, Centennial,CO
Solar Panel Electrician Worked at the Elm City Duke Site for an Electrical company name E-Light.
05/11/2015 to 07/04/2015 Advanced Technical Services
Instrumentation and Electrical Worked at a Eaton Manufacturing plant in Fayetteville, NC Producing motor control centers and distribution panels.
04/06/2015 to 05/07/2015 Engineering Services LLC
Instrumentation and Controls Worked at Susquehanna Nuclear Power Plant in Berwick, PA. Calibrating and loop testing of the separation tanks.
12/01/2014 to 03/24/2015 Day Zimmerman, Norfolk, VA
Instrumentation and Electrical Worked at the Brunswick Nuclear Plant in South, NC. Assisting with the intrusion Detection System project.
08/25/2014 to 10/27/2014 Sun Technical, Reno NV
Instrumentation and Controls Worked at the DC Cook Nuclear Power Plant in Bridgeman, MI. Outage work consisted of installing Magnetrol Level Switches, Radar Wave Transmitters, Temperature Elements, and Control Room System Upgrades on the plant Feed Water Heater Project
07/07/2014 to 08/20/2014 Technical Diagnostic Services
Customer Service Engineer Contracted worker for Emerson Network Power to upgrade their uninterrupted power supply’s at given Walmart locations
04/14 /2014 to 06/06/2014 Engineering Services LLC, Berwick, PA
Instrumentation and Control Worked at the Susquehanna Nuclear Power Plant in Berwick PA. Supporting the refueling outage.
03/03/2014 to 04/04/2014 Crane Nuclear Inc, Kennesaw, Georgia
Instrumentation and Control Worked at the South Texas Project under the AOV team for a refueling outage.
10/29/2013 to 12/08/2013 AMES / BHI Nuclear/BWB
Instrumentation and Controls- Worked at the Shearon Harris Nuclear Plant in New Hill, NC for a refueling outage. Participated with the testing of the RAD monitors along with the trouble shooting of the fire alarm system for containment
09/30/2013 to 10/25/2013 Sun Technical, Reno, NV
Instrumentation and Controls- Working at the DC Cook Nuclear Plant in Bridgman, MI for a refueling outage. Participated in the fuel rod control system upgrades.
06/04/2013 to 09/17/2013 Austin Industrial, Augusta, Georgia
Instrumentation and Electrical- Working at a pharmaceutical plant in Florence, South Carolina
called Roche Carolina Incorp. They produce the medicine for cancer treatments in place of having chemotherapy.
04/08/2013 to 05/04/2013 Crane Nuclear, Plymouth, Massachusetts
AOV Technician- Working at the Pilgrim Nuclear Site for the refueling outage.
10/29/2012 to 03/21/2013 Florida Power and Lights, Homestead, Florida
Instrumentation and Controls- Working at the Turkey Point Nuclear Site on the regular scheduled PMs. This was during the unit 4 upgrade.
07/09/2012 to 10/03/2012 AEROTEK, Raleigh, NC 27607
Instrumentation and Electrical – Worked at the DuPont Teijin Films out of Fayetteville, NC. Work consisted of maintaining a chemical plant under contract.
03/12/2012 to 06/28/2012 Florida Power and Lights, Homestead, Florida
Instrumentation and controls – Worked at the Turkey Point Nuclear Site on the regular scheduled PMs along with the FIN teams urgent work. This was during the unit 3 upgrade.
09/19/2011 to 02/17/2012 Florida Power and Lights, St. Port Lucie, Florida
Instrumentation and Control – Worked on the Extended Power Upgrades which involves the generator and steam turbine engineering improvements. Job consist of completing work packets from start to finish on, Calibrations of the PTs, FTs, and Radar Wave Transmitters, along with tubing of the Diesel Engines and the testing of the Smoke Detection Systems
09/05/2011 – 09/10/2011 United Labor Group , Logansport, IN. 46947
Instrumentation and Controls – Trained on the wireless radar transmitters for the company “Flowdata” located in Grand Junction, Colorado
06/27/2011 – 08/12/2011 The Shaw Group Inc., Charlotte NC 28202
Control Electrician – Worked at the Buck Project in Salisbury, NC. The power plant which will consist of a combined system (Natural gas and Steam) Owned and operated by Duke Energy. Ran cables to all the field devices ( PT, MOV, Thermocouples, Actuators ) per work packet.
05/02/2011 – 06/09/2011 Bartlett Nuclear Inc., Plymouth, MA 02362
Instrumentation and Controls – Working at the Sutton Steam Generation Plant in Wilmington NC. Project consist of supporting Progress Energy in their Carbon Emission Control Systems.
11/15/2010 – 04/29/2011 Newport News Industrial, Newport News, VA,23606
Instrumentation and Controls – Working at the Robinson Nuclear Plant for Progress Energy
Project consist of supporting the FIN TEAM on the maintenance backlogs.
10/02/2010 – 11/10/2010 Newport News Industrial, Newport News, VA 23606
Instrumentation and Controls- Working at the Shearon Harris Nuclear Plant for Progress
Project consist of supporting Plant Operation in their calibration and systems checks .
07/12/10 – 09/29/2010 DZ Atlantic Corp Office, Norfolk VA
Industrial Electrical – Working at the North Anna Nuclear Plant for Dominion Power.
Project consist of upgrading of the security package.
05/19/10 – 07/08/10 DZ Atlantic Corp Office, Norfolk, VA
Industrial Electrical – Working at the H.B.Robinson Nuclear Plant for SGT(Steam generator team). Project consisted of installing all the power and control wiring on the 4160v steam generator pump.
03/29/10 – 04/20/10 Clear Path Recycling , Fayetteville, NC
Electrical and Instrumentation – Assisting with the install of new equipment.
This company will produce a chemical call PTE, abstracted from clear plastic.
02/14/10 – 03/17/10 DZ Atlantic Corp Office, Norfolk, VA
Industrial Electrician – Working at the McGuire Nuclear Plant for Duke Energy.
Project consisted of working with the DCS group performing upgrades in the control room.
12/08/2009 – 01/20/10 DZ Atlantic Corp Office, Norfolk, VA
Industrial Electrician – Working at the Shearon Harris Nuclear Plant for Progress Energy
Project consisted of running ¾” to 4” ridgid conduit for the pre-outage.
09/28/09 – 11/18/09 DZ Atlantic Corp Office, Norfolk, VA
Industrial Electrician – Worked at the Palo Verde Nuclear Plant for Arizona Power Service. Assisted Westinghouse with the install of a new designed air handling unit in containment # 2
04 -13-09 – 08-27-09 DZ Atlantic Corp Office, Norfolk, VA
Industrial Electrician – Worked at the Crystal River Nuclear Plant in Florida under Progress Energy. Assigned to the temp power group during the pre-outage. Role consist of setting a 500kva transformer, running the service conduit and High Voltage Cable. Learn the termination of stress cones.
01/08 – 09/08 Design Contemp. Inc, Lumberton, NC
Maintenance Manager – Engineer, Supervisor and Tech.
This company produces furniture for the military barracks and also for the college dorms
CNC machines would form the angles. Dryers, sprayers and conveyors would produce the final steps. Responsibilities were plant wide maintenance.
12/10/07 – 12/14/07 Atlantic Service Group INC, Orlando, Florida
Industrial Electrician – A shutdown which lasted 1 week in Tallahassee, Florida at a plant called St. Marks powder. Their main product is gun powder. Job consisted with the wiring of an Allen Bradley PLC and running of 1” conduit.
10/15/07 – 10/30/07 Austin Industrial Inc., Augusta, Georgia
Instruments &Electrical – A shutdown which lasted 2 weeks in Augusta, Georgia at a plant called DSM Chemicals North America. Assisted the Instrument and Control Techs with the calibrations. Learn the process of shooting loops.
9/22/07 – 10/22/07 DZ Atlantic Corp Office, Norfolk, VA
Breaker Tech – Worked at the Sharon Harris Nuclear Plant under Progress Energy. Assisted the Instrument and Electrical Department with the servicing and testing of their breakers. Trip times were recorded and mechanical mechanisms were cleaned and lubed.
02/2005 to 12/2006 Pulau Electronics Orlando, Florida
Hardware & software Support Tech – A military contract with the department of defense for the maintenance of the training systems called Engagement Skills Trainer Responsible for training of Army Active Duty Soldiers in small arms weaponry at Fort Bragg, N.C.
2004-2005 ESI Companies, Memphis, TW
Commercial Electrician – At a prison in Maxton, N.C. Job consisted with reading blue print, running ½” to 5” electrical metallic tubing, hanging cable tray, and pulling control wire with pneumatic
2002 – 2003 Cargill Turkey Products, St.Pauls, N.C.
Electrical Supervisor – instrumentation & controls
This plant was in meat food processing. One of many different commodities. Its opening comes from a merger with prestige foods. The operation was ran off of Sigma software from the kill floor to the warehouse. Responsibilities lie in the upkeep of the electrical inventory and second shift projects.
1999 – 2002 Pilkington, Laurinburg, N.C
Process Tech – Electrical and Mechanical
The largest glass manufacturer in the industry. Responsibilities were on the cold end side of the plant. The areas range from inspection, crating and shipping. Vision systems scan the glass during inspection. ABB robotics lift and pack the glass in crating. 10 and 20 ton cranes ship thur the warehouse.
EDUCATION *Gas Technology Institute Dec 02,2015
LNG Plant Operator Training and Certificate
* OSHA 10 Certified July 4, 2014
* Procedure Writing / Procedure Solution Management June 09, 2014
Certified Professional Procedure Writing
* Transportation Worker Identification Card May 17, 2010
* National Center for Construction Education and Research Feb 4, 2010
Instrumentation Certified and Electrical Certified
* Almeda University, Boise, Idaho March 2006
Bachelor of Science in Electronic Engineering
* Richmond community college, Rockingham, NC 2001-2002
Certifications Electrical Engineering / Maintenance
* Robeson community college, Lumberton, NC 1990-1992
Industrial Electrical and Electronics
* Robeson vocational school, Industrial Electrician and Electronics 1989-1990
Industrial Electrical and Electronics
Michael W. Mackey – GP Strategies Vice President 760-705-3446
Sam Ferguson – LNG Operator 336-451-1088
Dan Peele – Instrumentation and controls supervisor/Shearon Harris 919-362-2544
Victoria Goode – Instrumentation and Controls with FPL/Nuclear Power 409-988-4030
Ebedmelech J. Parker- Maintenance Manager of the EST at Fort Bragg- 919-906-7470
Oris Bullard- Nuclear Electrician with BWB 910-734-2450
Jay D Locklear – Electrician with DZ Atlantic/Nuclear Power 910-733 -8156
Clyde Ray Patrick- Instrument and Electrical with BWB 910-625-5703
To contact this candidate email email@example.com