Senior Systems Engineer
This resume has been forwarded to you at the request of Monster User xnerx03 pulled, lvm and emailed for l3
Last updated: 07/25/13
Job Title: no specified
Company: no specified
Rating: no specified
Screening score: no specified
Status: no specified
Parsippany, NJ 07054
Contact Preference: Email
Quick View Links:
Resume Headline: Mike Kertesz – Sr. Engineer Resume Value: cnhz39rq57d25fgn
M. Kertesz Pg 3 of 3
27 Carlstadt Rd • Parsippany, NJ 07054
Career Objective: Facilitate the growth and technological development of a company through the use of my creative and innovative ideas and comprehensive design experience.
20+ years of solid design experience
Embedded design – hardware/software
Real-Time Systems design
Strong in-circuit emulation experience
Self-starter able to work independently
Digital filter design
UL & CE requirements
Development from concept to production
Honeywell International, Inc
Morristown, NJ (6/07 – Present)
Senior Systems Engineer
Responsible for writing software requirements specification for classified IED jamming radio project. Startup specification for selection of processor, hardware and review of system. Software design in C & C++ for use under Micrium’s uC/OS-II RTOS running on an Analog Devices ADSP-561 Blackfin DSP Platform. Working knowledge of GPS systems. Design of test sets using LabView for radio project. Used Texas Instruments’ CodeComposer Studio for special TMS320F2812 based Controller board, Also, provided software support for various Embedded Processor projects related to the IED jamming radio project.
Impact Instrumentation, Inc
West Caldwell, NJ (6/05 – 6/07)
Senior Embedded Engineer
While working in a team environment, I am responsible for hardware and low-level software design of a portable ventilator system, which is replacing the company’s core product line. Designs were implemented for the software for Brushless DC motor control architectures, which uses the TI TMS320F2808 DSP microcontroller and Software was developed with the TI CodeComposer Studio C, C++ Compiler. Also an Atmel ARM9 microcontroller was used with the Micrium uC/OS-II RTOS for the graphics interface. The schematic and PCB were developed using the Altum Protel Tools. I generated high level documentation for all aspects of software development in accordance with FDA required standards. This includes all project specifications, design, test and hazard analyses for the software implementation.
DPC Instrument Systems Division
Flanders, NJ (9/01 – 3/05)
Senior Software Engineer
Responsible for software design of a complex stepper motor control system and system communications within a newly designed medical instrument. Designed and implemented the software architectures for distributed stepper motor control on CAN bus, Brushless DC motor control, and a FLASH Bootloader to be utilized to download firmware code to instrument in a production environment. Design included both CAN bus and RS-232 communications implemented on the Motorola Coldfire 5272 and DSP56F8357. Used C, C++ and assembly programming languages developed using the Motorola CodeWarrior with BDM/JTAG for the ColdFire and DSP56XXXX product line. I generated high level documentation for all aspects of software development in accordance with FDA required standards. This includes all project specifications, design, test and hazard analyses for the software implementation.
Siemens Building Technologies Corporation
Florham Park, NJ (7/99 – 9/01)
Responsible for all aspects of new product development. Used AMX RTOS & C programming with Microsoft compiler for special real-time fire system based on an Intel 80186 embedded system. Project used Paradigm Locate & Debug for embedded platforms. Design of all hardware and firmware of plug-in communication module based on the Motorola 68HC908AZ60 CPU and Ethernet (CSMA/CD). Design was for a proprietary fire safety monitoring / reporting system utilizing an RS-485 driven local communications layer along with high-speed modems over dedicated leased lines.
Florham Park, NJ (12/98 – 7/99)
Senior Project Engineer
Responsible for the development of new precision weighing products. Designed hardware and firmware for 8051 based digital scales. Utilized delta-sigma techniques to realize a 20-bit A/D converter. Used DSP filtering algorithms for noise filtering, additional product designs implemented using the National Semiconductor COP8 CPU. Designed MS-DOS based code to allow for easy product personality changes of the scale in both production and post-production environments.
NBS Card Technology Corporation
Paramus, NJ (10/94 – 12/98)
Senior Electronic Engineer
Design of hardware and software for product incorporating both the Intel 80186 & 8051 microprocessors. Designed a low cost embedded system for special real-time applications using the AMX RTOS. Designed all the required interface and driver circuits for stepper motor control. Developed a low-level driver library containing the functions common to stepper motor control. Designed a digital P.I.D. control loop for temperature control. Code was written in Assembler & C. Required Knowledge of UL & CE requirements. PCB development was performed using OrCAD PCB.
Kearfott Guidance & Navigation Corporation
Wayne, NJ (8/90 – 11/93)
Senior Electronic Engineer
Responsible for 8051 controlled DMA board. Designed the required firmware for all DMA transfers. Designed an analog buffer card to provide required voltage interface levels from resolver to syncro converter. Involved in the integration of large ATE systems to test Aircraft Inertial Navigation Systems. Carried out PCB circuit design for end item Test Equipment.
Distek Incorporated – North Brunswick, NJ
Electronic Engineer – (5/89 – 5/90)
KDI/Triangle Microwave Incorporated – East Hanover, NJ
Electronic Engineer – (9/85 – 10/88)
Affiliated Manufacturers Incorporated – North Branch, NJ
Electronic Engineer – (1/85 – 5/85)
Bell Laboratories (Consultant) – Morristown, NJ
Electronic Engineer – (2/84 – 7/84)
Sealed Unit Parts – Allenwood, NJ
Electronic Engineer – (10/83 – 2/84)
Singer?Link Flight Simulation – Binghamton, NY
Field Engineer – (7/82 – 10/83)
Jaguar Dealer ( T & T Motors) – Highlandpark, NJ
Senior Mechanic – (1977 – 1979)
Fairleigh Dickinson University Teaneck, NJ
Masters of Science in Electronic Engineering (10/94)
Digital Signal & Image Processing
Adaptive Digital Signal Processing
FIR and IIR filter Design
JPEG Compression, Fiber Optics systems
Digital Signal Processing Algorithm Design
DeVry Institute of Technology Phoenix, Arizona
Bachelor of Science in Electronic Engineering Technology (6/82)
Software Engineering Institute (SEI), Carnegie Mellon (2003)
Personal Software Process- PSP certified
Object – Oriented C++ Programming Course ( 2000)
10 week course sponsored by the IEEE, North Jersey Section
Lincoln Technical Institute Union, NJ
Automotive Service Excellence (ASE) certification (1977)
Power Train, Engine, Fuel Injection, Electrical, A/C, Braking Systems
CAN bus, MathCAD, MatLab, LabVIEW for Windows, OrCAD, Pspice,The Intel 80×86, 8051, Motorola DSP56XXXX & ColdFire CPU languages. VXI, ISA and IEEE-488 bus. Knowledge of T1, E1, ISDN Protocols. C and C ++ programming languages, Codewrite programmers’ tools, Franklin 8051 tools & Borland C Compilers and Assemblers. Paradigm Locate & Debugger for embedded systems. CodeWarrior, Nohau, Applied Microsystems & Checkmate Emulators. Cosmic C Compiler and Emulator for the Motorola 68HC908AZ60.
Knowledge & experience with UL & CE requirements.
Hi-Fidelity Audio, Part Time Actor, Digital Photography, Bicycle Riding, Karate.
Ham Radio / Amateur Radio License: Technician Class N2RVG.
Volunteer: Boy Scouts of America – Cub Scout Leader, Boy Scout Leader
MarchingBand Parent – Active in all School events
References: Available upon request.
Experience BACK TO TOP
Job Title Company Experience
Sr. Engineer Honeywell – Present
Additional Info BACK TO TOP
Current Career Level: Experienced (Non-Manager)
Years of relevant work experience: More than 15 Years
Date of Availability: Within 2 weeks
Work Status: US – I am authorized to work in this country for any employer.
Target Job: Target Job Title: Sr. Engineer
Desired Job Type: Employee
Desired Status: Full-Time
Target Company: Company Size:
Occupation: Other •
IT/Software Development •
Target Locations: Selected Locations: US
Willingness to travel: No Travel Required
Languages: Languages Proficiency Level
To contact this candidate email Mkertesz@ieee.org