E-mail me at:
Chapel woods Dr. Batavia, OH 45103 (513) 491-4201

• Service-driven • Programmable logic controller [PLC] • Hardworking • Lean Automotive, Automation, Powertrain,
Assembly, Manufacturing and Machines Tools
• Responsible • Computer Controls
• Teamwork • Performance testing
• Ability to work independently • Problem – Solving
• Interpersonal skills • Engineering operational functions
• Willing to learn

• Siemens S 5 (PLC) . Fanus servomotor and Driver
• Siemens S 7 (PLC) . Indramat Works Indralogic [PLC] • Siemens WinCC . Indramat Servomotor and Driver
• Siemens Simatic Panels • Beckhoff – Twincat
• Siemens Sinumerik Panels • Conveyor, Drives, Transfers and Take Up’s
• Siemens Protool • AutoCAD2010
• Siemens HMI Transline 2000 • Advanced Electrical/Troubleshooting
• Siemens Profibus and Profinet • Liebherr LH90 Software
• Siemens Servomotor and Drive • Basic Pneumatic
• AB SLC 500 (PLC) • Basic Hydraulic
• AB PLC 6200 • Basic Mechanics.
• AB RS Logix 5 (PLC) • Ethernet
• AB RS Logix 5000 (PLC) • Outlook
• AB Panel View 32 • Excel
• AB Panel Bulder 1400E • World
• AB Servomotor and Driver
• Fanuc Series 90 PLCs


ABB, Auburn Hills, MI October 2015 – November 2015
Controls Engineer (Project Contract)
. Commissioning Washers for Ford Canada (Winsdor Onatario).

Bosch, Florence, KY May 2015 – July 2015
Controls Engineer (Project Contract)
• Software and hardware troubleshooting.
• Troubleshoot production issues related to machines sequence of operations.

Gudel Inc., Ann Arbor, MI July 2014 – January 2015
Controls Engineer/Field Service Engineer (Project Contract)
• Worked on site and completed the job to customer’s specifications .
• Managed installations, start-ups, tests, debugs, commissioning’s, repairs, and resolved issues, software and hardware troubleshooting; (Supporting Gudel at GM and Ford).

Gleason Metrology Systems Corporation, Dayton, OH September 2013 – June 2014
Service Engineer
• Worked and trained in the Metrology Systems, Electrically, Software and mechanically

NJ Enterprises January 2013 – September 2013
Owner/Controls and Automation Technician-Consultant
• Consulting with electrical, electronics and basic mechanical servicing of machine tools and automation.
• Worked and get trained in Metrology Systems; electrically, software and mechanically.

Liebherr Gear Technology and Automation Systems Saline, MI 2001 – January 2013
Controls Engineer/Field Service Engineer.
• Worked on site and completed the job to customer’s specifications
• Managed installations, start-ups, tests, debugs, commissions, repairs, and resolved issues in software and hardware troubleshooting.
• Automation: conveyors, drives, transfers, take up’s, materials handling systems and other associate Controls.
• Integration automation (conveyors, drives, transfers, take up’s, etc.) with CNC machines.
• Provided technical supports, assistance to maintenance department to
• Enhance plant up time, productivity and efficiency at customer’s plant such as GM, FORD, CHRYSLER, CATERPILLAR etc.
• Reviewed some electrical schematics.
• Worked with the mechanical engineers to make the machines and Automation work properly.
• Performed Controls modifications to machines and automated production to increase equipment efficiency.
• Provided advanced technical troubleshooting, field service diagnostics and repair of control systems and components as assigned.
• Provided advanced field service support for the installation of custom integrated controls of supplier equipment as may be required, (i.e. Conveyor, Drives, Transfers, Take Up’s., etc.).
• Developed reference and training material for new control components and system to be available for customer service support.
• Provided introduction and training for customers and Customer Service personnel on setup and operation of control systems and components as may be required..
• Assisted with the setup, calibration and operation of custom controls and equipment integration as may be assigned. This may be during Initial set up at company and/or at customer site.
• Worked closely with Engineering and Manufacturing to determine software and hardware requirements to support controls and components and provide training on its use.
• Participated in service job planning and preparation for control commissioning for new equipment and field retrofit installation.
• Provided accurate and professional written and oral reports in English.
• Act as liaison between Service, Manufacturing, Engineering and Suppliers to provide feedback on problems encountered during Initial commission and or start up.
• Worked flexible hours to support customer service needs.
• Traveled domestically and internationally to support service projects as assigned.

Cis Robotics, Sterling Height, MI 2000 – 2001
Controls Engineer/Field Service Engineer.
• Supported electrical controls engineering at several industries.
• Troubleshoot production issues related to machines sequence of operations.
• Installations, start-ups, commissioning and debugs controls systems on automation systems.

Ford Essex Aluminum Plant, (EAP) Windsor, ON 1999 – 2000
Controls Engineer.
• Provided electrical controls engineering support for plant facility improvement and maintenance actions.
• Troubleshoot production issues related to machines sequence of operations.
• Supported for electrical design changes and/or material changes.
• Reviewed the electrical wiring diagrams, programs and safety concerns on existing plant equipment.

Regal International, Windsor, ON 1997 – 1999
Electrical Controls Engineer.
• Reviewed the Electrical wiring diagrams and programs and safety concerns on existing plant equipment.
• Supported plant objectives to develop/enhance plant equipment specification, updating different controls sequences.

Reko Machines Builders, Windsor, ON 1993 – 1997
Electrical controls /Start-up Technician
• Initial start- ups of Machines.
• Managed Installations, start-ups, tests, debugs, commissioning’s, troubleshoot and repairs on new built and retrofit machines.

Heineken Brewery, Amsterdam, the Netherlands 1989 – 1992
Electrical/Controls Engineer Assistant
• Maintenance, troubleshooting, and repair conveyors systems.

Bachelors of Science in Electrical Engineering.

  • Updated 8 years ago

To contact this candidate email

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.