Ritesh Majmudar

This resume has been forwarded to you at the request of Monster User xnerx03 pulled for L3

Ritesh Majmudar
Last updated: 03/18/15

Job Title: no specified
Company: no specified
Rating: no specified
Screening score: no specified
Status: no specified

Parsippany, NJ 07054
US

Mobile: 973-960-0804
Home: 973-884-1393
rjm4520@gmail.com
Contact Preference: Email

Quick View Links:

Resume Section
Summary Section

RESUME

Resume Headline: Ritesh Majmudar Sr. Systems Engineer – Aerospace/defense Resume Value: etgvcvywjifdwm88

Ritesh J. Majmudar
207 Jacksonville Drive, Parsippany, New Jersey 07054
http://www.linkedin.com/in/riteshmajmudar
(973) 960-0804 rjm4520@gmail.com

QUALIFICATION SUMMARY
Accomplished engineer with extensive experience in Electrical Systems Engineering within Aerospace defense industry, new product development, design verification, subsystem testing and integration. I am experienced in bringing a product from customer fabrication specification to a deliverable product. Deliverable product includes requirement management into DOORS, systems compliance, specification documentation, SDRLS, PCB schematic layout, simulations and FMEA reliability/risk analysis, prototype experiments, software/hardware integration and verification, validation testing, qualification Mil-Std-810, EMI-EMC 461C testing, troubleshooting, FRACAS, BOMs, root cause analysis and production support.
CORE COMPETENCIES
? Lead Systems Engineer with focus on details defining customer needs and required functionality early in the development cycle, documenting requirements, compliance verification planning, allocation, system architecting, interface and data architectures, test cases, test procedures, validation and verification, sub-system test and integration, system & operation performance analysis, production test specifications, printed circuit board layout.
? Over 10 years in electrical circuit prototype design verification, Ring Laser Gyro (RLG) and Fiber Optics Gyro (FOG), Electromechanical piezoelectric actuator control circuits, PWM switching power supply DC-DC converter, ADC-DAC, Motorola digital microcontroller, Actel FPGA reprogramming, checksum verification, VMEbus PCI interface, Ethernet 100baseT, RS232, RS422, ARINC 429 serial com and TCP-IP protocol, component obsolescence (RoHS compliance), safety and EMC testing, PCB circuit card assembly troubleshooting, field failure root cause analysis and production support.
?Field reliability failure root cause analysis, qualification testing within federally regulated specifications, FAA, CMMI, Mil-Std-810, DO-160, DOD, ISO methods and process development.
?Creative problem solver, known for collaborating with internal and external customers to develop innovative, reliable and cost effective solutions that meet or exceed expectations.
?Effective and organized team player with focus on design details, process and test specifications.
TECHNICAL COMPETENCIES

PSpice Simulations
Orcad Schematics
Entry-level UNIX

VMEBus, logic analyzer
Mentor Graphics
Entry-lvl VHDL

Matlab/Simulink
Programming Logic
Entry-level C++

MS Office, Bugzilla
VISIO, Windows OS
MS Project, AS400

MS Word, MS Excel
LabVIEW, DOORS
MS PowerPoint

PROFESSIONAL EXPERIENCE
BAE SYSTEMS, Electronics Systems Division, Endicott, NY 3/2014 to 11/2014
Sr. Electrical Systems Engineer (Consultant for ESG Group, Parsippany, NJ)
? Technical Systems Lead for major aerospace, Boeing commercial and military flight control systems, actuation and cockpit avionics product development programs specification requirement definition.
? Decomposition and allocation of system level requirements to cross functional team of mechanical, software, electrical and quality engineering generate system and sub-system design architectures.
? Create product integration and test plans from specifications for sub-systems, software and hardware manufacturing prototypes. Conduct schematic reviews, ATP testing, EMI and Qualification Testing.
? Management of overall system requirement into DOORS, verification compliance, transition from design conception and layout to manufacturing, technical documentation of SDRL deliverables.
? Lead all internal/external customer CDR’s (Critical Design Reviews), software and hardware integration, validation and environmental qualification testing to successfully finalize a deliverable system that meets customer requirements. Technical lead for CDRs, PDRs, PMR and TRR reviews.

KEARFOTT CORPORATIONS OF AMERICA 6/2011 to 8/2013
A subsidiary of Astronautics Corporations of America, a premier supplier of Inertial Sensor Navigation products customized for Land, Sea-underwater and Air-manned and unmanned military missions.
Ritesh J. Majmudar rjm4520@gmail.com Page 2 of 3

Senior Engineering Specialist – Lead Systems Engineer for Land systems

? Project lead for all technical requirements, from development cycle to final integration, validation, generating installation and maintenance manual, operator training and production support.
? Generated product fabrication specifications from customer requirements, Statement of Work (SOW).
? Led trade studies and managed all design adaptation activities among cross-functional teams of software, electrical, mechanical and systems engineering emphasizing Non-Recurring Engineering (NRE) cost, design risk mitigations and delivery schedule.
? Led all CDR’s (Critical Design Reviews), software and hardware integration, validation and environmental qualification testing to successfully finalize a deliverable system that meets all customer requirements. Technical lead for CDRs, PDRs, PMR and TRR reviews.
? Managed development of Reliability Prediction Reports per Mil-Hdbk-217F and FMECA IAW Mil-Std-1629A. Supported all system environment qualification tests and reports.

Key Contributions:
? Developed Test Plan that identified critical design flows in sub-contractor display application,
resulted in improved performance, further accelerating delivery of final systems ahead of schedule. Received a letter of appreciation from customer in meeting their target delivery.
?Implemented FIR (Field Inspection Report) that validates customer vehicle integration with Kearfott NAFCOS (Navigation and Fire Control systems) navigation performance upon first field survey, eliminating additional cost of repeated tests.
?Pioneered critical software, hardware systems safety and human engineering assessment required by customer, eliminating cost and schedule delays of additional software/hardware modification due to safety issues identified by customer.
?Reduced field related cost and mission critical issues by responding promptly to field failures, identified systematic failures, proposed improvements, supported design changes, established root cause and corrective actions for all land based tactical systems.

L-3 Communications (formerly Allied-Signal Honeywell International Co.) 4/2006 to 3/2011
Supplier of control, guidance and navigation systems for the aerospace industry, with customers that include Lockheed Martin, Boeing, the U.S. military and NASA.
Staff Electrical Engineer – Systems Test and Integration Lab Supervisor
? Led Integration & System test development on sensor support electronics, switching power
supply design prototype data analysis, Microprocessor / Microcontroller, FPGA programming,
checksum verification, Test & debug utilizing LabView based application test software.
? Developed system and sub-system Test Plans, hardware/software integration and verification,
Matlab/Simulink analysis, design performance evaluation metrics.
? Managed lab inventory, software version tracking upgrades, procurement, calibration, and design validation schedules. Direct liaison to test equipment and production repair shop technical issues.
? Generated and coordinated Final Qualification Tests, Environmental and EMI, EMC verification,
Component analysis, Quality Assurance root cause and corrective action.
? Evaluated field failures on systems and sub-systems, isolation to component level, test reports,
customer verification, and design process improvement for systematic failures.
? Performed Automation test utilizing Ethernet 100base T/RS232/1553 protocol based test set.
? Direct supervision of entry-level electrical engineers in training.
? Lead Technical Interface with external & internal customer (quality assurance) on component obsolescence, root cause and corrective action to component level on field failure issues.
Key Contributions:
? Directed a project that required the redesign of an analog dither & PLC loop circuit for an RLG

Ritesh J. Majmudar rjm4520@gmail.com Page 3 of 3

Rate sensor. The original circuit utilized was a hybrid ASIC IC that became obsolete.

?Implemented test bed and debug setup that reduced troubleshooting time by 30% on field failures.
?Received a special recognition award from the division president for implementing a cost effective solution to fielded systems that threatened to shutdown production resulting in $1.2 million in cost overrun.
Honeywell International Co. (formerly Allied Signal Aerospace Co) 3/1998 to 4/2006
A fortune 100 company with approximately 122,000 employees worldwide with business units in Aerospace, Control and Automation, Transportation Systems and Specialty Materials.

Electrical Engineer II

?Prioritized all aspects of development: collaborating with principal engineers on documentation design, expediting purchasing department with components engineering, performing acceptance tests
on prototypes, training test technicians, supporting production in manufacturing new modules and
supporting customer in use and modifications.

?Performed system integration, calibration/testing and troubleshooting of engineering prototype
inertial navigation unit utilizing RS232, Ethernet 100baseT and Sysbus-1553 test software. Key personnel for EMI and environment qualification testing prior to production phase.

?Work with senior design and software engineers in developing prototype test, integration, layout, upgrades, and simulation and debugging until production phase.

?Executed software test and integration on conversion to VX-works real-time operating system on prototype units. Design upgrade of protection circuitry on Power Supply CCA (circuit Card Assembly) and VMEBus supported ASIC/EEPROM serial Interface motherboard design.

?Developed calibration, test procedures and trouble-shooting guides for PNU (Position and Navigation Unit) utilized on M270A1/MLRS (Multiple Launching Rocket Systems) program.

?Trained production engineers on compensation of RLG (Ring Laser Gyroscope) systems from initial electronics integration, circuitry debugging to final acceptance testing.

?Created and maintained CCA test specifications, procedures and troubleshooting references using Oscilloscope, Spectrum analyzer, VMEBus and Logic analyzer for technician and production engineers.

?Led all hardware testing to qualify final system schematic release per Final Qualification Test (FQT).
Key Contributions:
?Recognized subject matter expert (SME) in inertial sensor electronics debugging. Utilized this expertise in multiple new development projects such as PALADIN and IPADS systems.
?Key engineering interface to reduce system test debug cycle time in successful migration to production phase.
?Lead interface to quality assurance in field complaints root cause analysis resulting in design improvement and customer satisfaction.
?Created all acceptance and design verification test procedures; trained technicians.
?Technical Interface to weekly telecom with subcontractor and customer on obsolescence reliability issues.
EDUCATION
New Jersey Institute of technology, Newark, NJ
Masters of Science, Electrical Engineering, Telecommunications; 2003, With Highest Honors; GPA: 3.5/ 4.0. Six Sigma Design Training, Total Quality Training 1 & II: 1998, Allied-Signal Co., NJ
Bachelor of Science, Electrical Engineering, 1995
Member, Industry of Electronics and Electrical Engineers (IEEE) organization since 1994

Experience BACK TO TOP
Job Title Company Experience
Sr. Systems Engineer BAE Systems Inc – Present

Additional Info BACK TO TOP

Current Career Level: Experienced (Non-Manager)

Years of relevant work experience: More than 15 Years

Date of Availability: Within 2 weeks

Work Status: US – I am authorized to work in this country for any employer.

Active Security Clearance: None

US Military Service:

Citizenship: US citizen

Target Job: Target Job Title: Senior Systems Engineer, Electrical Engineer, Test and Integration Engineer, Hardware Engineer

Desired Job Type: Employee
Temporary/Contract/Project

Desired Status: Full-Time

Target Company: Company Size:

Industry: Aerospace and Defense
Biotechnology/Pharmaceuticals

Occupation: Engineering • Aeronautic/Avionic Engineering
• CAD/Drafting
• Electrical/Electronics Engineering
• Systems/Process Engineering

Target Locations: Selected Locations: US-NJ-Northern

Relocate: No

Willingness to travel: Up to 25% travel

Languages: Languages Proficiency Level
English Fluent
Hindi Intermediate
Spanish Beginner