Stephen Deitz

stphndeitz@yahoo.com
Stephen Deitz
QA Third Party Piping/Welding
A position as a QA/QC Inspector with your organization offering growth and
Advancement where my experience, technical training and ability will be of value.

Responsibility Summary

– Third Party Quality Assurance Inspection Onshore and Offshore Facilities
– Maintaining quality control program and controlling all types of QC
Documents and records
– Inspect and supervise subcontractors’ work for completeness
– Liaison between Subcontractors and Clients
– Monitored all welds for acceptance within customer standards,
A.N.S.I. B31.3 and A.S.M.E. Section IX
– Final acceptance interpretation of radiography film within codes & standards
– Responsible for punch out of piping systems & acceptance of all hydrostatic testing
– Civil inspections and structural architect, from interpretation of drawings to
Completion of construction
– Coatings inspection from checking anchor profiles to completion of
Coatings systems
– Outlined Hydrostatic Test packages and Pneumatic tests
– Mechanical: All major equipment, vessels, pumps, turbines, compressors
And other apparatus from receipt to installation, to assure conformance
With A.S.M.E. Sections I, II, V and VIII.
– All phases of turn-around and on-stream inspections in various facilities
In Petrochemical and Chemical Plants
– Vendor Surveillance of the fabrication of piping spools, vessels and heat
Exchangers
– Inspection service for major grass roots expansion and adjacent to
Existing production plant facilities

Specialized Training

2006 Helicopter Passenger Safety Program
1994 A.W.S. C.W.I. #94050041
1987 Equipment and Piping Drafting
1987 Dye Penetrant Testing – Level II
1987 Ultrasonic Testing – Level II
1987 Magnetic Particle Testing – Level II
1985 Radiography Testing Film Interpretation – Level II
1983 A.W.S. Prepatory for Welding Inspectors Seminar
1981 Industrial Radiography Film Interpretation: 16 hours
1981 A.N.S.I. B31.1 & B31.3 A.S.M.E. Code Training: 80 hours
1981 Dye Penetrant Application and Interpretation: 32 hours

Experience and Qualification

– Highly Motivated Industrial QA/QC Inspector
– Able to take full control of project from analysis through implementation
– Third Party Inspection of offshore platform facilities, Jacket installations, Production Deck Modules, Hookups, and Subsea Pipelines
– Third Party of Major Expansions, Plant maintenance and Turn-Around Inspection
– Inspection of Equipment and Piping preparation for completion
– Inspection of Civil, Structural, Coatings and Insulation
– Fitup, Welding and installation
– Vendor Surveillance Inspections
– Audit sub-contractors Q.C. documents
– Liaison between Construction Supervisors, Area Managers and Client
– Interpreted Dye Penetrant and Magnetic Particle examination on pipe welding
And vessel repairs including exotic metals
– Interpretation and Inspections of Mechanical, Civil, Structural and
Architectural drawings
– Extensive work at offsite facilities, API-1104 Pipelines, Tank Inspections to API-650
– All phases of turn-around Inspection
– Radiography film interpretation
– On-stream piping and equipment corrosion inspection with ultrasonics
– Piping and Equipment drafting
– Failure analysis, along with welder qualifications and procedures in lab
– Various other experiences associated with Industrial Inspection and
Structural Architecture

(361) 815-0470
Rockport, TX 78382

QA Third Party Piping/Welding American Inspection Artesia, NM
September 2014 to October 2014
Mechanical Turnaround Inspector
Site: Navajo Refining

QA Third Party Civil/Piping/Welding G.A.S. LLC Tuleta, TX
November 2013 to December 2013
Mechanical Inspector
Site: Atlas Pipeline Cryogenics
Treating Facility

QA Third Party Piping/Welding Code Inspection Corpus Christi, TX
August 2013 to September 2013
Mechanical Turnaround Inspector
Site: Citgo Refining

QA Third Party Piping/Welding American Inspection Artesia, NM
January 2013 to February 2013
Mechanical Turnaround Inspector
Site: Navajo Refining

QA Third Party Civil/Piping/Welding TEAK Midstream, LLC Tuleta, TX
March 2012 to November 2012
Mechanical Inspector
Site: Silver Oak 200mm Cryogenics
Treating Facility

QA Third Party Piping/Welding All Tech Inspection Corpus Christi, TX
August 2010 to December 2010
Mechanical Inspector
Site: Valero Bill Greehey Refining

QA Third Party Piping/Welding Universal Personnel Inc Garyville, LA
February 2009 to November 2009
Mechanical Inspector
Site: Marathon Louisiana Refining

QA Third Party Sr. Mechanical Inspector Saudi Aramco
June 2006 to July 2008
Site: Northern Area Offshore Projects Division

Quality Assurance Third Party Inspector Petrochem Inspection Services Corpus Christi, TX
December 2004 to July 2005
Dec. 2004 to July 2005
Site CITGO Refining

Quality Assurance Third Party Inspector Demar Ltd Corpus Christi, TX
August 2003 to April 2004
Site: CITGO Refining

QA/QC Site Manager Bay Ltd Corpus Christi, TX
February 2003 to July 2003
Site: Valero Bill Greehey Refining

Q/A Third Party Inspector Baseline Data Inc Corpus Christi, TX
August 1990 to January 2003
Site: Citgo Refining

Q/C Inspector/Supervisor Brown and Root USA, Inc Ingleside, TX
June 1989 to April 1990

Industrial Inspector Dupont Inc Corpus Christi, TX
July 1986 to April 1989
July 1986 to April 1989
Site: National

Q/C Inspector Brown and Root USA, Inc Ingleside, TX
November 1984 to December 1985

Q/C Inspector Dupont Inc Convent, LA
May 1983 to October 1984
May 1983 to October 1984

Q/C Inspector Dupont Inc Longview, TX
September 1982 to April 1983

Q/C Inspector Eastman Kodak Inc Reserve, LA
September 1980 to April 1982
September 1980 to April 1982
Site: Dupont Inc.

  • Updated 8 years ago

To contact this candidate email stphndeitz@yahoo.com

Contact using webmail: Gmail / AOL / Yahoo / Outlook

This entry was posted in . Bookmark the permalink.