Tariqul Islam

tariqul.islam@utoronto.ca
Tariqul Islam MEng, PEng. (ON,SK.)
Professional Engineer
Results oriented professional with extensive experience in conceptual to detailed process engineering including construction, pre-commissioning, and commissioning and start-up activities. Proven competency in the operation and management of potash, bauxite, alumina refinery, Copper, Gold, Magnesium, Lithium, sulfuric acid, ammonia- urea plant, oil-gas, pulp and paper industries, Effectively leads both unionized and non-ionized employees with proven leadership, communication, interpersonal and problem solving skills.

My work experience along with my education qualified me as a process Lead for several Canadian EPCM companies as well operation engineer in KAFCO and process safety engineer in Jurong Shipyard Ltd.

Areas of expertise include
– Mass and energy balance, developed block flow diagram, PFDs, P&IDs, ISO, Layout, process design criteria, process control philosophy. pre-commissioning manual, System diagram, SOP.
– Developed logic on FCM, PLC, Calculation of alarm and interlock set points.
– Experienced in hydraulic calculation, process simulation (Metsim, SysCAD, HYSYS), lines, valves and plant equipment€™s sizing
– Design and operation experience of heat exchangers, digesters, crystallizers, evaporators, Ion exchange, distillation columns, scrubbers, cyclones, bag houses autoclaves, flash vessels, flotation cells, thickeners, washers, tanks and pumps;
– Liaised with a wide variety of stakeholders both internal and externals
– Experience in RFQ, TBE , RFI, RFP and TDR. Involved in packages datasheet preparation and turn over documents,
– Strong knowledge on risk assessment, HAZAN/HAZOP, project planning, monitoring, WBS creation, issue log preparation
– Prepared order of magnitude estimate, Pre-feasibility and Feasibility report.
– Experience in debottlenecking, root cause analysis and process optimization
– Hands on experience on turnover of care and custody control (TCCC), notice of readiness (NOR) of a system, punch list and Prestart-up safety review (PSSR)
– Worked as a Lead Auditor of ISO 9001 internal auditing
– Experience in value improvement analysis and worked in high efficiency environment.
– Involved in man-hour estimate. Supervised Junior, senior engineers and process operators.

1-416-840-4656
Oakville, ON

Professional Engineer Designate Oakville, Ontario, Canada
January 2016 to Present
Responsibilities
Results oriented professional with extensive experience in conceptual to detailed process engineering including construction, pre-commissioning, and commissioning and start-up activities. Proven competency in the operation and management of potash, bauxite, alumina refinery, Copper, Gold, Magnesium, Lithium, sulfuric acid, ammonia- urea plant, oil-gas, pulp and paper industries, Effectively leads both unionized and non-ionized employees with proven leadership, communication, interpersonal and problem solving skills.

My work experience along with my education qualified me as a process Lead for several Canadian EPCM companies as well operation engineer in KAFCO and process safety engineer in Jurong Shipyard Ltd Singapore.

Areas of expertise include
– Mass and energy balance, developed block flow diagram, PFDs, P&IDs, ISO, Layout, process design criteria, process control philosophy. pre-commissioning manual, System diagram, SOP.
– Developed logic on FCM, PLC, Calculation of alarm and interlock set points.
– Experienced in hydraulic calculation, process simulation (Metsim, SysCAD, HYSYS), lines, valves and plant equipment€™s sizing
– Liaised with a wide variety of stakeholders both internal and externals
– Experience in RFQ, TBE , RFI, RFP and TDR. Involved in packages datasheet preparation and turn over documents,
– Strong knowledge on risk assessment, HAZAN/HAZOP, project planning, monitoring, WBS creation, issue log preparation
– Prepared order of magnitude estimate, Pre-feasibility and Feasibility report.
– Experience in debottlenecking, root cause analysis and process optimization
– Hands on experience on turnover of care and custody control (TCCC), notice of readiness (NOR) of a system, punch list and Prestart-up safety review (PSSR)
– Worked as a Lead Auditor of ISO 9001 internal auditing
– Trained operators on operation, health and safety.
– Experience in value improvement analysis and worked in high efficiency environment.
– Involved in man-hour estimate. Supervised Junior, senior engineers and process operators.

Process Lead SNC-LAVALIN INC Toronto, ON
January 2010 to December 2015
• Agrium Vanscoy Potash Operations, Vanscoy, Saskatoon, Canada. Process Completion Lead working with commissioning support group.
• Agrium Vanscoy Potash Operations, Vanscoy, Saskatoon, Canada – Process Lead
• Cortez Hills Gold Project, Barrick Gold, Crescent Valley, Nevada, USA €“ Senior Process Engineer
• Maaden, Umm Wual phosphate project, sulphuric acid and power plant, Saudi Arabian €“ Senior Process Engineer
• CaMau Fertilizer Complex, Phu My Project, Vietnam €“ Senior Process Engineer
• Minera Panama SA, Provinces of Colon and Cocle, Panama €“ Senior Process Engineer

Senior Process Engineer HATCH Mississauga, ON
September 2004 to January 2010
• M&J, KP-488, Saskatoon, Canada. – Process Lead
• Mosaic Potash, Esterhazy, Saskatchewan, Canada – Piping Lead.
• Mosaic Potash, Colonsay, Saskatoon, Canada – Process Lead
• Simbol Mining Corp. Lithium Project €“ Senior Process Engineer
• EuroChem Mineral and Chemical Company, EuroChem-VolgaKali Potash Ore Processing Facility, Volgagrad region, Russian Fed., Process Lead (Dry Area).
• Shell Canada – Senior Process Engineer
• Area Process Engineer for 2.21 MMTA brownfield expansion , Western Australia, Australia;
• Ormet Primary Aluminum Corporation. Louisiana, USA.
• ALCOA. Kingston, Jamaica – Process Engineer
• SUAL Komi BV. Sosnogorsk, Russia. -Process Engineer

Process Safety Engineer JURONG SHIPYARD LIMITED Singapore
1999 to 2001
Major Ship Building and Repair Projects: Safety and Process Engineer. Worked in the building and repairing vessels, including flotation and storage operation tankers (FSOs); flotation, processing and
storage operation tankers (FPSOs); offshore oil rigs; very large crude carriers; liquefied natural gas
(LNG) tankers; liquefied petroleum gas (LPG) tankers; and normal tankers. Worked with engineering
team during construction, pre-commissioning and commissioning phases. Worked Petrobras Brazilian

project P38 and P40 project. Developed pre-commission plan. Organized and facilitated HAZOP
analysis. Conducted incident investigations, identified root cause (using fish bone chart and Pareto
analysis) and recommended solutions. Participated in pre-commissioning such as equipment leak
tests, steam blowing, water run chemical cleaning and passivation. Developed guidelines and specifications for the handling of dangerous chemicals. Approved hot-work and chemical cleaning
permits. Worked as an auditor of ISO 9001 internal auditing.

Process Engineer (Ammonia and Urea) KARNAPHULI FERTILIZER CO. LTD
1992 to 1999
Evaluated the engineering design package of ammonia plant (PFDs, material and energy balances,
P&IDs, equipment list and plant operating manual) provided by the process licensor or vendor.
Oversaw the erection works of ammonia plant and coordinated the activities of the process licensor
(Haldor Topsøe A/S), general contractor/vendors (Chiyoda), and production department of KAFCO.
Actively participated in pre-commissioning and commissioning activities, such as individual
equipment leak tests, steam blowing, water run chemical cleaning and passivation, refractory brick
drying, as well start-up and test runs of different turbines, compressors and pumps or individual
loops. Involved in performance test calculation of reactors. Prepared and corrected Standard
operating Procedure (SOP) of ammonia plant. Developed procedures and involved personally during catalyst loading of different reactors, such as primary and secondary reformers, high and low
temperature CO converters, methanetor and ammonia converter. Knowledge of absorber to remove
CO2 as an impurity during ammonia production and regenerator to separate CO2 and use it as a raw
material of urea production. Involved in ammonia plant capacity increase study and steam
consumption reduction project. Worked as a shift in charge once handover complete. Worked in utility system such as boiler feed water system, steam system, cooling water system, nitrogen,
instrument and process air generation unit. Experienced in boiler feed and potable water treatment
system using ion exchange. Knowledge of troubleshooting and continuous improvement. pre- commissioning/commissioning of a unit with catalyst including drying by avoiding sintering and
preservation. Conducted daily meeting with operators and group leader to provide daily instruction.
Approved maintenance work order from operation and liaison with other departments/contractors to alignment with all plant maintenance. Calculated daily production, reagents and energy consumption
including steam.

MEng Chemical Engineering University of Toronto
Toronto, ON
2004

BSc Chemical Engineering Bangladesh University of Engineering and Technology

1992

Heat and Mass balance (10+ years), P&ID, PFD, ISO (10+ years), FCM, PLC, Alarms & Interlocks (9 years), Process Engineering (10+ years), Problem Solving (10+ years), Project Management (5 years), Process Improvement (9 years), Autocad (5 years), Ability To Multi-Task (10+ years), Troubleshooting (10+ years), Analytical Skills (7 years), Business Development (6 years), Change Management (5 years), Computer Skills (10+ years), Critical Thinking (10+ years), Data Analysis (6 years), Excellent Communication Skills (10+ years), Estimating (4 years), FMEA (1 year), HAZAN (10+ years), HAZOP (10+ years), Hydraulics (9 years), ISO (5 years), Implementation (5 years), Knowledge Management (2 years), Lean Six Sigma (1 year), MS Office (10+ years), Mentoring (10+ years), Organizational Skills (6 years), Operations Management (10+ years), Risk Assessment (6 years), Supervisory (10+ years), Six Sigma Green Belt (1 year), Scheduling (5 years), Training (8 years), Turnarounds (5 years), PSSR (5 years), NOR (5 years), Visio (7 years), Training (10+ years), Process simulation (10+ years), Hydraulic calculation (10+ years), MSDS (10+ years), Hot work inspection (8 years), PSM (8 years), Process design criteria (10+ years), Process control philisopy (9 years), Microsoft Project (6 years), Piping layouts (9 years), Tie-points (8 years), Feild Engineering (5 years), Calalyst loading (6 years), Leak test (8 years), Chemical Cleaning (8 years), Daily production calculation (8 years), Calalyst reduction (8 years)

https://ca.linkedin.com/in/tariqulislampeng

Lean Six Sigma Green Belt
December 2018

PEO
December 2016

APEGS
December 2016

ISO 9001 Internal Auditor Course, Singapore
August 1999