YIHONG (IRIS) NASH 3426 US ROUTE 11
LAFAYETTE, NY 13084
(315) 469-2063 (H) (315) 436-1534 (Cell)
To secure a position in the mechanical engineering utilizing my 20 years of design and fabrication experience and enabling me to take on new challenges.
Dedicated professional attitude; self-motivated; willing to work in a variety of settings; excellent record of dependability, loyalty and reliability.
ProE Engineer, Carrier Corp., 6304 Thompson Rd, Syracuse, NY, 2010-2016
Project lead for redesign of control box focused on part count, weight and cost reduction. Performed engineering support including design concepts and part/assembly modeling as well as releasing drawings to production. Conducted TRB’s for design review and tooling release and test plan QRBs. Supported failure modes effects analysis (DFMEA), and finite element analysis (FEA) for various programs. Performed qualification tests for prototype and supported procurement for manufacturing engineering check sample (ECS) and manufacturer check sample (MCS). Worked as part of XtendFresh engineering team to design and fabricate control box assembly for a field trial. Developed compressor piping, frame, schematic, high voltage harness and low voltage harness design for PrimeLINE efficiency improvements program. Orion project lead on display upgrade as well as lead for Athena access panel and polymer control box. Tasks included designing, project scheduling, engineering prototype build, component and unit level qualification testing. Supported E-solutions by creating qualification test plans and retrofit installation instructions for field trial.
Mechanical Engineer II, Lockheed Martin Corp., Electronics Parkway, Liverpool, NY, 2008-2010
Hardware lead for Block III SPDP engineering build. Designed RF cable assemblies and created Schematic diagrams and connection diagrams. Worked as liaison to operations for part design release and flow. Several environmental failures were overcome in a short duration to meet the program milestones. Worked directly with production to solve all process, quality and product issues. Designed and ordered all manufacturing tooling needed to deliver completed GD-53(V)2 radar processor assemblies. Attended component peer reviews to evaluate Design for Manufacturability. Addressed customer’s manufacturing questions and concerns. Set-up and executed testing/troubleshooting for circuit card assemblies.
Mechanical Engineer II, Lockheed Martin Corp., Electronics Parkway, Liverpool, NY, 2007-2008
Performed research, design, modeling and engineering build and fixturing for all aspects of engineering including thermal, analog and digital electronics packaging and modkit assemblies. Supported a multitude of programs meeting all cost and schedule commitments.
Mechanical Engineer I, Lockheed Martin Corp., Electronics Parkway, Liverpool, NY, 2004-2007
Was responsible for designing and working collaboratively with manufacturing, quality and drafting to produce modkits for DO26, DO30, DO34 and DO37 upgrades to the TPS-59 programs. Through innovative packaging ideas as a team we were able to reduce program costs returning $1 million to the program. Mentored ELDP and interns on Eaglespeed configuration management tool and engineering processing.
Drafter, Lockheed Martin Corp., Electronics Parkway, Syracuse, NY, 2002-2004
Worked with both Pro/E models and AutoCAD; corrected document errors to prepare for production release. Mentored Pro/E designers on the conversion of Pro/E solid models into AutoCAD. Created 3D models of parts and assemblies and incorporated change notices.
HVAC Drafter, RobsonWoese Inc., Consulting Engineers, Syracuse, NY, 2000-2001 Utilized AutoCAD to create floor plans for HVAC equipment. Calculated heat loss and gain. Worked with latest state codes, process and procedures for HVAC layouts.
AutoCAD Drafter, Knise & Krick, Precision Machine Tool Inc., Syracuse, NY, 2000 Responsible for drafting detailed drawings and plans for the manufacturing of machine tools, providing exact dimensions of material. Also responsible for providing the latest layouts and tolerance standards.
AutoCAD Drafter, Insul-Tek Piping Systems Inc. Syracuse, NY – 2000
Created piping sketches. Drafted detailed plans and drawings for layout, construction and operation of pipeline systems; developed detail drawings for construction of pipeline systems utilizing AutoCAD 2000.
Engineering Assistant, Guang Zhou Honda – Wang Yuan Motorcycle Co., P.R. China, 1987-1990
Designed drilling machine parts; drafted advanced stage design process; analyzed failed parts used in testing laboratory; performed time-study duties in department operation as well as actively managed department payroll.
EDUCATION 2005-2014 Syracuse University, School of Engineering, Syracuse, NY – Earned MSME Spring 2014 Mechanical Engineering Program: Cumulative GPA 3.4: Advanced Mechanics of Materials – Stress and strain analysis, Fluid Dynamics, Finite Element Analysis, Vibrations, Composites Materials, and Materials Testing, HVAC Systems, Fundamentals/Turbulence, Building Environmental Modeling, Design for Manufacturing, Methods of Analysis/Mee, Living Systems in Arch&Engineer, Statistics for Engineers.
1996-2005 Syracuse University, School of Mechanical Engineering, Syracuse, NY – Earned BSME Fall 2005 Mechanical Engineering Program: earned a 3.5 GPA: Mechanical analysis ANSYS, Engineering Materials, Mechanics, Dynamics, Physics II, Science for 21st Century, Anthropology and Environmental Science, Project Management.
1998- 2000 Onondaga Community College, Syracuse, NY – Earned AAS May 2000 Earned AAS in Mechanical Engineering Technology, Honors: studied Mechanical Drawing, Mechanical Parts Design, Intermediate CAD, Machine Tools, Calculus III and Chemistry, Physics, Java Programming, Pro/Engineering 2001, Differential Equations.
1983-1987 Zhong Shan University, P. R. China –May 1987
Successfully earned Bachelor Degree following a general course of study with a concentration in Mechanical Engineering.
SUMMARY OF KEY QUALIFICATIONS
• Pro Engineer/AutoCAD • Electronics Packaging • Cable Design • Piping Design • Fixture Design • Geometric Dimensioning/Tolerancing • CAM Trained/Quoting • Team Building/leadership • Scheduling/Planning Tasks • Meeting cost and Schedules • ANSYS (Stress/Thermal Analysis)
• Proposal Support • Problem Solving/Troubleshooting • Trade Study • Contract Requirement Reviews • EagleSpeed/EPDM/PIOS MRP
• Parts lister/EPDM • Project schedule/Microsoft project
TOOLS • Pro-E Cabling • Pro-E Machine parts • Pro-E Assembly • Pro-E Mechanisms • Pro-E Sheetmetal
• Oracle/AutoVue • AutoCAD 2011 • ANSYS Classic/Workbench • Java • Matlab • Zuken E3 Cable • Creo 3.0/Windchill 10.0 • Microsoft Suite • Raster design • Adobe Acrobat Professional
Fluent in Cantonese and Mainland Chinese to support technical communications for business in China, Singapore and Taiwan.
Available upon request